AKO 8004H001 Surface Mounted Humidity Probe User Manual

June 13, 2024
AKO

AKO - Logo

8004H001 Ed.08
AKO-80040 Humidity probe

Description

Surface-mounted humidity probe with 4-20 mA output

Warnings

Ensure that the operating conditions are not exceeded in the place of installation (see technical features).
Do not install it close to sources of heat, excessive dust, mechanical vibration or where it might be exposed to direct sunlight or magnetic fields.
If it is installed in dusty environments, ensure it is regularly cleaned by removing the protector (A) and using low pressure compressed air or distilled water.
Submitting it to sudden temperature changes may produce internal condensation. In this case, wait for about one hour before switching on the power.
Ensure that the supply voltage is within the admissible range (see technical features).
Disconnect the power supply beforing performing any type of maintenance.

Technical specifications:

Power supply: ……………………………………………………………………………….8 to 24 VDC
Protected against inversed polarity:……………………………………………………………..Yes
Output:……………………………………………………………………………………………..4-20 mA
Sensor type:………………………………………………………………………………………….Digital
Maximum load at 8 VDC: ………………………………………………………………………±50 W
Connections:…………………………………………………………………….1.5 m of 2-wire cable
Measurement range:……………………………………………………………………..5 to 95% RH
Precision:………………………………………±3% RH from 20 to 80% RH, otherwise ±5%
Probe time response: ……………………………………………………………………………..< 30 s
Calibration: ……………………………………………….0/100% RH (0=4 mA y 100=20 mA)
Protection:……………………………………………………………………………………………….IP65
Ambient working temperature: ……………………………………………………….-10 to 70 ºC

Installation

Fix the bracket (1) using the screw and plug provided and press the probe (2) gently into the bracket.

Marron: +V / Brown: +V / Braun: +V
Verde: Salida (S) / Green: Output (S) / Vert : Sortie (S) / Grün: Ausgang (S)

Wiring

No external power

AKO 8004H001 Surface Mounted Humidity Probe - Wiring 1

With external power

AKO 8004H001 Surface Mounted Humidity Probe - Wiring 2

  • Version 3 or previous

AKO ELECTROMECÁNICA , S.A.L.
Avda. Roquetes, 30-38
08812 Sant Pere de Ribes.
Barcelona Spain.
www.ako.com

We reserve the right to supply materials that might vary slightly to those described in our Technical Sheets. Updated information is available on our website.
358004001 REV .07 2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals