JAMARA 460247 Pico Quad Motorquad RC Vehicles Instructions

JAMARA 460247 Pico Quad Motorquad RC Vehicles

General information

JAMARA e.K. is not liable for any damage caused to the product itself or through this, provided this is due to improper operation or handling errors. The Customer alone bears the full responsibility for the proper use and handling, including without limitation, the assembly, the charging process, and the use and choice of the operation area. Please refer to the operating and user instructions, it contains important information and warnings

Suitable for children over 3 years
Warning: Not suitable for children under 36 months.

RISK OF SUFFOCATION

• Contains small parts which can be swallowed.
• Keep away necessarily from children
•  Before playing, remove all protective films from all parts
•  This product is not intended for use by individuals (including children) with reduced physical, sensory or mental capabilities or lack of experience and/or knowledge.
•  Due to its top speed, this toy is not suitable for children under 3 years!
•  Minimum age: 3 years (Depending on the development, a minimum age of 4 years could be appropriate), Maximum weight: <30 kg

Before assembly

•  Read the complete instructions and security instructions carefully before using the model.
•  Adults are required for assembly. Keep children away while assembling.
•  Tools (not included) needed for assembly: Screwdriver.

Certificate of Conformity
Hereby JAMARA e.K. declares that the product „Pico Quad, No. 460247“ complies with Directive 2014/53/EU, 2011/65/EU, and 2009/48/EC. The full text of the EU Declaration of Conformity is available at the following Internet address: www .jamara-shop.com/Conformity

• Read the complete instructions and security instructions carefully before using the mode
• To prevent accidents and injuries, DO NOT leave your child unattended during the operation of the vehicle.
• Never let your child out of your sight while driving a vehicle.
• DO NOT use the vehicle on public roads or places or other dangerous locations.
• ONLY operate the Ride On Car in places such as private parking, private land or other safe locations. Make sure that no person or animal is endangered.
• The model stops after releasing the accelerator, independently on a horizontal surface.
• The vehicle has no brake or parking brake. Do not operate the vehicle uphill or downhill, and secure it when parking.

DANGER

•  For safe driving, you should make sure that your Child understands and adheres to the following rules:
•  Always sit tight, and do not get up during the ride.
•  Never take additional Children for a ride. (The vehicle is only suitable for 1 person)
•  Hold tight.
•  Never drive without shoes.
•  Never drive in the dark.
•  Keep hands, hair, loose clothing, and any other item away from any rotating parts.
•  The Model should not be used in rooms or halls with high humidity (for instance garages), in the rain or on wet surfaces. Risk of malfunction or damage to electronics and housing.
•  The model is not water- or splash-proof. Only operate on asphalted surfaces (such as paving stones). The model is not suitable to be operated in grass or loose soil.

Parts

Assembly

Mounting the rear axle

• Turn the vehicle body (1) upside down.
• Remove all the parts from the rear axle (7).
• Insert the rear axle through the hole in the rear of the vehicle’s body.

Mounting the driving wheels

•  Fit the driving wheel (4) onto the rear axle (7). Make it match the gearbox.
•  Fit a Ø 10 mm (A) washer onto the rear axle.
•  Fit a Ø 10 mm locknut (B) to the end of rear axle. DO NOT over-tighten.

Mounting the wheels

•  Remove a locknut from the front axle and leave over a Ø10 washer (A).
•  Fit a wheel (5) onto the front axle.
•  Fit a Ø10 washer (A) onto the front axle.
•  Fit a Ø12 locknut (B) to the end of the front axle and tighten with a spanner. DO NOT over-tighten.
•  then insert the cover (6) of the wheel. Repeat this procedure to assemble the other wheel(s).

Fitting the Batteries

•  Remove the screw in the battery cover on the back of the handlebar with a screwdriver and lift to open.
• Insert two AA batteries (not included) into the handlebar.
• Replace the battery cover.

Battery Warning

• Non-rechargeable batteries are not to be recharged!
• Do not open!
• Do not dispose of it in the fire!
• Do not mix old and new batteries!
• Do not mix alkaline batteries, standard (carbon-zinc), or rechargeable batteries!
• Rechargeable batteries are to be removed from the toy before being charged!
• Rechargeable batteries are only to be charged under adult supervision!
• The supply terminals are not to be short-circuited!

Mounting the handlebar

•  Turn the vehicle body over.
•  Fit the handlebar steering column (2) through the large opening in the front of the vehicle (1).
•  Lift the front end of the vehicle up slightly.
•  Check to be sure the steering column fits through the hole in the steering linkage.
•  Push down on the handlebar assembly to „snap“ it in place.

Battery connection

• Remove the five screws in the battery cover with a screwdriver and lift to open.
• Connect all connectors as shown. Only plug matching connectors into each other and be sure not to reverse the polarity. Make sure the red wire is well connected with the red terminal on the battery, and the same as the black one.

Assemble the seat

•  Fit the tabs on the front of the seat into the slots.
•  Push down firmly near the back of the seat to „snap“ it in the vehicle.
• You will need to remove the seat to replace the fuse. To remove the seat, press the tabs at the back of the seat and lift.

Charging Your Vehicle

•  The power switch must be turned in the OFF position when charging.
•  Plug the charger port into the input socket and plug the charger plug into a wall outlet. The battery will begin charging.
•  The charge time is 12 hours.
•  Do not charge the battery more than once within 24 hours.
•  The charger and battery heat up during the charging process.

Warning!

•  Let the model cool off sufficiently after each use before putting it back into operation. When using additional batteries let it cool off for minimum 15 minutes until the model is operated again. Overheating can damage the electronics or may result in fire.
•  Always disconnect the model from the charger immediately after charging. Always disconnect the charger from the power supply immediately after disconnecting the model. Inserting the rechargeable model or charger after charging will result in damage to the model, charger or the power supply (fire hazard).
• Only use in direct supervision of an adult! To control the vehicle a minimum skill level and caution is needed. Make sure you are familiar with the operation of the model and its characteristics. The model is heavy. This is an increased risk of injury and damage in the event of loss of control. Avoid any kind of intentional or unintentional collisions with objects or hazards to persons.

Functions

ON/OFF Switch
By pressing the ON / OFF switch

1. is the model on or off.
2. forward/Backward switch
   • Forward – Press the “Forward-backward switch” (2) on the “Forward” position. Press the gas pedal (4), the model drives forward.
   • Stop – Release the gas pedal (4) and press the stop button.
   • Back – Press the “Forward-backward switch” (2) on the “Back” position. Press the gas pedal (4), the model drives backward.IMPORTANT!
   • Always stop vehicle when changing the speed or direction to avoid damage the gears and motor.
3.  Horn: Horn sound can be activated when press

Caution
Always switch off the model immediately after each use. Immediately after each use the battery should be disconnected from the model. The battery can be deeply discharged by leaving it switched on accidentally or leaving it plugged in. Deep discharge causes the battery to lose power or can be damaged to such an extent that charging or discharging is no longer possible or the battery can self-ignite during charging or discharging (fire hazard). Never attempt to charge or discharge deeply discharged batteries. The battery voltage should never fall below 5.7 volts to avoid deep discharge.

The fully charged bat-tery has a voltage of approx. 6.5Volt. After use, the intact battery should be fully charged immediately after a cooling phase of at least 10 minutes but at the latest after 12 hours to avoid subsequent deep discharge by self-discharge. If the battery is not used or stored for a longer period of time, the battery should be checked for voltage (min. 6.2 volts) or damage at least every 3 months and charged or disposed of if necessary.

Troubleshooting

1.   The vehicle does not run
   •  The battery may low on power.
   • After each use, or once a month minimum, charge the battery.
   • Do not leave the battery on the charger for more than 12 hours.
   •  Thermal fuse has tripped.
   • The vehicle is equipped with a self-resetting fuse. When the vehicle is overloaded or operated incorrectly; the self-resetting fuse will be cut off for 5 – 20 seconds before becoming operational again.
   • To avoid the fuse cut off the power, follow these guidelines:
   • DO NOT overload the vehicle, Maximum weight allowed: 30 kg
   • DO NOT tow anything behind the vehicle.
   • DO NOT drive up steep slopes.
   • DO NOT drive into fixed objects, which may cause the wheels to spin, causing the motor to overheat.
   • DO NOT drive in very hot weather, components may overheat.
   • DO NOT tamper with the electric system, Doing so may create a short circuit, causing the fuse to trip.
   •  Wheel nuts are loose.If the nuts are not tight, the wheels will not engage the forward gears. Tighten the nut with the nut wrench.
   •  Battery connector or wires are loose.Make Sure the battery connectors are firmly plugged in to each other.
   •  Battery is dead.Have you properly maintained the battery according to the directions? Is the battery old?Your battery may need to be replaced.
   • Electric system is damaged.Water may have corroded the system, or loose dirt, gravel or sand might have jammed the switch.
   • Motor is damaged.The motor needs professional repair.
2.   The battery will not recharge
   •  Battery connector or adapter connector is loose.
   • Make sure the battery connector and adapter connector are firmly plugged together.
   • Charger is not plugged in.
   • Make sure the charger is plugged into the wall outlet and the power flow to the outlet is on.
   •  Charger is not working.
   • Is the charger warm while charging? If not, the charger may.
3.   The vehicle does not run very long.
   • Battery may be undercharged.
   • You may not be charging the battery long enough. After each use, or once a month minimum, charge the battery. Do not leave the battery on the charger for more than 12 hours.
   • Battery is old.
   • The battery will eventually lose the ability to hold a charge. Depending on the amount of use, and varying conditions, the battery should operate for one to three years. Replace the battery with a new one.
4. Battery buzzes or gurgles when charging.
5. Charger feels warm when recharging battery.
   •  This is normal and not a cause for concern.

Disposal restrictions

Batteries and accumulators must not be disposed of in domestic waste. You are obliged to dispose of batteries (seperate collection) appropriately. After use you can return batteries free of charge to the retail store. As batteries contain substances that can be irritant, can cause allergy and are highly reactive, separate collections and proper recycling is important to the environment and to your health. If the batteries are marked with a chemical symbol Hg, Cd or Pb below the crossed-out waste bin on wheels it refers to that more than 0.0005% of mercury (Hg), more than 0.002% of cadmium (Cd) or more than 0.004% Lead (Pb) is included.

Disposal restrictions
Electrical appliances must not be disposed of in domestic waste and must be disposed of separa-tely. You are obliged to take out the batteries, if possible, and to dispose of the electrical equipment at the communal collection points. Should personal data be stored on the electrical appliance you must remove them by yourself.

Service centre
PenTec s.r.o. distributor Jamara for Czech Republic and Slovakia Veleslavínská 30/19
CZ -162 00 Praha 6 Tel +420 235 364 664 Mobil. +420 739 075 380

References

• jamara.com
• Herzlich willkommen bei der Bay-Tec Modelltechnik!
• jamara.com
• Reitter Modellbau & Robotics - Zubehör, Ersatzteile, Bausätze

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>