SQ professional 7280 Dainty Luminate Blender and Grinder Instruction Manual

instruction manual

BEFORE OPERATING THIS UNIT, PLEASE CAREFULLY READ THE FOLLOWING INSTRUCTIONS.

IMPORTANT!

Due to sharp parts and potential hazards, this appliance is not suitable for the use of children under 16 years old.
Children under the age of 16 must be supervised by an adult at all times if using or cleaning the appliance.
Even when off please keep the appliance and mains cable out of the reach of children.
This is not a toy!
The appliance can be used by persons with reduced physical, sensory or mental capabilities if they have been given supervision and instruction and understand the use and hazards involved.
Always disconnect the appliance from the power socket if it is left unattended and before assembling, disassembling, or cleaning.
If the mains cable is damaged, it must be replaced by qualified persons in order to avoid any hazards.

FEATURES

1.  Measuring cup
2. Lid
3.  Grinding mill cover
4.  Grinding mill
5. Glass blending jug
6.  Rubber sealing ring
7. Cutting blade
8. Jug base
9. Motor unit
10. Rotary switch
11. Assembled blender
12.  Assembled grinder
13. Assembled jug base unit

SPECIFICATIONS

READ THE INSTRUCTIONS AND KEEP THEM SAFE. REMOVE ALL PACKAGING BEFORE USE.

IMPORTANT SAFEGUARDS

WHEN USING ANY ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

1.  Read all instructions carefully before using the appliance.

2. This appliance is intended for household use only. It is not suitable for commercial use such as staff kitchen areas and other working environments.

3. Ensure that the appliance is always placed on a firm and flat surface, away from the edge of the worktop. Do not place the appliance onto a metal tray or metal surface whilst in use. Do not place the appliance on, or near, hot gas or an electric burner or in a heated oven. Do not operate the appliance with wet hands or barefoot.

4. Keep the appliance and mains cable away from the edges of worktops and out of reach of children. Route the mains cable so it does not overhang, and cannot be tripped over or caught.

5.  Do not let the mains cable run across an open space, such as between a low power socket and a table, or across any hot area, such as a cooker. Heat may damage the main cable.

6. The connections on both sides of the main cable (the appliance and power socket) should never be strained. If the mains cable is damaged it must be replaced by a qualified
   person or service to avoid any hazards.

7. Do not use the appliance in a bathroom, near water, or outdoors. Do not immerse any of the parts (appliance, mains cable, plug) in water or other liquids to protect against ire, electric shock, and personal injury.

8. Do not use the appliance if it is damaged or malfunctioning. Do not leave the appliance unattended whilst in use. Use and store it out of reach of children.

9. This appliance must not be operated by an external timer or a remote control system.

10. SQ Professional Ltd will not be held liable for eventual damages to persons, animals or objects caused by incorrect installation or deriving from improper, erroneous or unreasonable use.

11. The jug base (8) should always be kept dry. Before washing and drying disconnect the power supply; ensure that the jug base (8) is completely dry before you reconnect the appliance to the power supply.

12. To reduce the risk of injury, never attach the cutting blade (7) directly onto motor unit 9 without the glass blending jug (5) properly attached.

13. Ensure the lid (2) or grinding mill cover (3) are securely in place and the glass blending jug (5) is correctly inserted into the motor unit (9) before operating the appliance.

14. Do not switch on the appliance when it is empty. Ensure there is at least a minimum amount of liquid or solid ingredients in the glass blending jug (5) or grinding mill (4) .

15. Always close the lid (2) or have the grinding mill cover (3) in place before you switch the appliance on. Do not open the lid (2) or grinding mill cover (3) whilst the appliance is running.

16. Keep hands and utensils out of the glass blending jug (5) while blending to reduce the risk of severe injury to persons or damage to the appliance. A spatula may be used but only when the appliance is not running.

17. Blades are extremely sharp. Handle carefully.

18. Switch off the appliance and unplug from the power socket before changing attachments or approaching parts that move while in use. Unplug the appliance when not in use.

19. Ensure that the appliance has come to a complete stop before cleaning and storing away. Keep the attachments, motor unit (9) , mains cable, and plug away from sources of heat. Store in a dry place.

20. Do not use this appliance for any other purpose than its intended use.

21. Use the glass blending jug (5) or grinding mill (4) only with the motor unit (9) supplied (and vice versa) and do not tamper with the connector in any way.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE!

BEFORE FIRST USE

ALL PARTS THAT COME IN TOUCH WITH FOOD ARE TO BE THOROUGHLY CLEANED BEFORE BEING USED FOR THE FIRST TIME (SEE SECTION
ON CLEANING).
Ensure that the rotary switch (10) is in position 0. Take out the required length of the main cable and plug it into the power socket.

ASSEMBLY OF THE GLASS BLENDING JUG OR GRINDING MILL

BLADES ARE EXTREMELY SHARP. HANDLE CAREFULLY!

1. Place the rubber sealing ring (6) on the cutting blade (7) as shown in image A.
2. Insert the blade unit with the rubber sealing ring 6 into the jug base (8). image B
3. Mount the glass blending jug (5) onto the jug base unit (13). Turn the jug base unit (13) clockwise until it is securely attached. image C

INSERTING THE GLASS BLENDING JUG OR THE GRINDING MILL

1.  Make sure that motor unit (9) is switched off (turn the rotary switch (10) to the 0 settings).
2.  Place the assembled glass blending jug (5) or grinding mill (4) onto the motor unit (9) and align the grooves. Push down until securely engaged. image D

USING THE BLENDER OR GRINDING MILL

1. Assemble the blender (11) or grinder (12) and ensure that the rotary switch (10) is turned to 0. Remove the lid (2) or the grinding mill cover (3) .

2. BLENDER : Place the ingredients into the glass blending jug (5) and attach the lid (2 )by pressing down firmly. Pour the liquids through the opening in the lid (2 )then insert the measuring cup (1) and turn it anti-clockwise until it is locked. For best results do not fill the glass blending jug (5) above the 1L marking, especially if using liquid ingredients.
   GRINDING MILL : Place the ingredients into the grinding mill (4) . Attach the grinding mill cover (3) and turn it counterclockwise until it locks.

3. Turn the rotary switch (10) to desired speed to switch the appliance on.

SPEED SETTING

1.  LOW SPEED – for light blending of liquid ingredients
2. HIGH SPEED – for heavy blending with solid ingredients and thicker liquids.
   PULSE SHORT BURSTS OF VERY HIGH SPEED –
   for rough blending of solid ingredients and thicker liquids, ice crushing, grinding and short, powerful pulse movements (the dial does not permanently engage in the PULSE  setting. You have to hold the dial or turn it repeatedly in the PULSE setting).
   After using the blender (11) or the grinder (12), always turn the rotary switch (10) back to the 0 settings and disconnect the mains cable from the power socket. To remove the glass blending jug 5 just lift it straight up.

USEFUL TIPS

1. To achieve the best results when pureeing solid ingredients, place small portions into the glass blending jug (5) one by one instead of placing a large quantity all at once. Do not overload.
2.  When processing solid ingredients, cut them into small pieces (2-3cm) first.
3. When mixing solid ingredients start off first with a small amount of liquid. Gradually add more of the liquid through the opening in the lid (2)
4. If blending warm liquids or ingredients always ensure that they are cooled down before blending. Do not fill the glass blending jug (5) over 1L / 4 cups mark.
5. Always stabilize the glass blending jug 5 or grinding mill (4 )by placing your hand on top of the lid (2 )or grinding mill cover 3 when operating the appliance.
6. For stirring solids or very thick liquid ingredients we recommend that you use a blender (11) in PULSE mode to prevent the blades from becoming stuck.

CLEANING MOTOR UNIT

NEVER IMMERSE THE MOTOR UNIT IN WATER.
Wipe the motor unit (9) clean with a damp cloth and dry immediately with a soft cloth to avoid scratches and watermarks on the surface.
LIGHT CLEANING
BLENDER: empty the glass blending jug (5) and fill it halfway with tepid water and a mild detergent. Place the glass blending jug 5 on the motor unit (9) and turn the rotary switch (10) several times into the PULSE setting, holding for a few seconds each time. Empty the glass blending jug (5) and rinse until clean, then dry.
GRINDING MILL: to clean the grinding mill (4) wipe inside it with a damp cloth or sponge, using tepid water with some washing-up liquid, if necessary. Remove any stuck food remains with a small dishwashing brush. Dry immediately with a soft cloth.

THOROUGH CLEANING

BE CAREFUL WHEN HANDLING THE CUTTING BLADE INSIDE THE JUG. THE BLADES ARE VERY SHARP.
BLENDER: Ensure that the grinding mill (4 )or blending jug (5 )is completely empty before you unscrew the jug base unit (13 ). Carefully detach the cutting blade (7) and wash it.  To remove the stuck food around the blades use a small dishwashing brush.
All parts except motor unit (9) can be washed by hand or in a dishwasher. Do not use harsh scourers and aggressive or abrasive detergents.

WIRING

THE APPLIANCE MUST NOT BE USED WITHOUT A FUSE COVER FITTED.
Should the power cable or the power plug become damaged, arrange for these to be replaced by Customer Service or a qualified person before continuing to use the appliance. This appliance is fitted with a 10A BS1362 fuse in a 10A BS 1363 plug. ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with this symbol must not be disposed of with unsorted municipal waste, but recovered, reused, or recycled.

SERVICE
The product is not user-serviceable. If it is not working, read the instructions, check the plug fuse and main fuse/circuit breaker. If it is still not working, consult your retailer. If that does not solve the problem, ring Customer Service – they may be able to offer technical advice. Please have the Model Number to hand, as they will not be able to help you without it. The model number is stated on the rating label, which is usually found on the bottom of the appliance. If you are advised to return the product to us, pack it carefully, including a note with your name, address, day phone number, and description of the problem. If under a guarantee, say where and when it was purchased and include a valid VAT  receipt. Send it to SQ Professional Ltd.

GUARANTEE

THE GUARANTEE FOR THIS PRODUCT IS COVERED BY SQ PROFESSIONAL LIMITED. ANY FAULTS WITH THIS PRODUCT ARISING THROUGH A  MANUFACTURER DEFECT WILL BE COVERED FOR 1 YEAR FROM THE DATE OF PURCHASE, SUBJECT TO A VALID VAT RECEIPT BEING  PRESENTED. THIS DOES NOT INCLUDE FAULTS OR DAMAGE CAUSED BY MISUSE OF GENERAL WEAR AND TEAR.
PLEASE CONTACT CUSTOMER  SERVICES ON 01992 716 070 OR SEND AN E-MAIL TO INFO@SQPROFESSIONAL. COM, MONDAY TO FRIDAY FROM 09:30 – 17:30. THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.

https://www.sqprofessional.com
SCAN THE QR CODE TO EXPLORE OUR FULL PRODUCT RANGE.
WWW.SQPROFESSIONAL.COM
Voltage Business Centre, Units 1 – 3 6 Mollison Avenue, Enfield, EN3 7XQ
T: 01992 716 070 | F: 01992 700 538 |info@sqprofessional.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>