Parrot Uncle B88831-6 110V 6-Light Chandelier Instruction Manual

Parrot Uncle B88831-6 110V 6-Light Chandelier

Product Information

The product is a Parrotuncle 6-Light Chandelier with the model number 8B8831-6 and operates on 110V power supply. It comes with natural shell tablets for decorative purposes. The product includes an installation and operating manual for the Parrotuncle owner.
Warnings: Before performing any actions related to the product, it is important to shut off the power at the fuse or circuit breaker to ensure safety.

Product Usage Instructions

Assembly

1. Insert a 60-watt maximum candelabra-base incandescent bulb or CFL/LED equivalent (not included) into the socket (E).
2. Refer to the crystal diagram provided for proper assembly.

Care and Maintenance

• Always turn off the electric current before cleaning the product.
• Use a soft, moist cloth with mild non-abrasive soap to clean the fixture. Avoid using glass cleaner as it may damage the metal finish.
• All glass shades can be washed in a towel-lined sink using warm water and mild soap. Do not wash the shades in an automatic dishwasher.

PACKAGE CONTENTS

HARDWARE CONT ENTS

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNIng
IMPORTANT: NEVER attempt any work without shutting off the electricity. Place the main power switch in the “OFF” position and unscrew the fuse(s), or switch “OFF” the circuit breaker switch(es), that controls the power to the fixture or room you are working in. Place the wall switch in the “OFF” position.

• If the fixture to be replaced has a switch or pull chain, place it in the “OFF” position. Do not use bulbs with wattage greater than specified on this fixture.
• California Prop. 65: This lighting fixture contains chemicals known to the state of California to cause cancer, birth defects, and/or other reproductive harm. Wash hands after use.

CAUTION:

• If you have any doubts about how to install this lighting fixture, or if the fixture fails to operate completely, please contact a licensed electrical contractor.
• All parts must be used as indicated in these instructions. Do not substitute any parts, leave parts out, or use any parts that are worn out or broken. Failure to obey this instruction could invalidate the ETL listing and/or C.S.A. certification of this fixture.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with packagecontents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes to 1 hour
Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, ladder, safety glasses.

ASSEMBLY INSTRUCTIONS

1. Screw fixture loop (J) onto coupling (F).

   • Note: The electrical cable will need to getpulled through the individual parts as they are installed on this and later steps.

2. Position threaded nipple (C) in mounting bracket (B) so when mounted:

   • The threaded nipple (C) will protrude a minimum of 1/4 inch beyond the raised center portion of the mounting bracket (B).
   • The threaded nipple (C) height is positioned so 1/2 the exterior threads of the screw collar loop (I) will extend past the canopy (A) when it is mounted.
   • Note: Canopy is only needed to determine the position of the threaded nipple and fixture loop. It will be installed later.

3. Once the proper position of the threaded nipple (C) a d mounting bracket (B) has been determined, secure with hex nuts (D) as follows:

   • Screw one hex nut (D) onto the threaded nipple (C) and tighten against the raised portion of the mounting bracket (B).
   • Screw another hex nut (D) onto the threaded nipple (C) and tighten against the flat portion of the mounting bracket (B). Screw the remaining hex nut (D) onto threaded nipple (C) and tighten against the screw collar loop (1).

4. Connect mounting bracket (B) to the outlet box with short machine screws (BB).
   Hardware Used

   • BB: Short Machine Screw

5. Thread chain (K) though screw collar ring (H) and canopy (A). Using the open chain links on chain (K), attach one end to the screw collar loop (1) and the other end to the upper fixture loop (J). Weave the fixture electrical and ground wires through every other chain link and pass through threaded nipple (C) into outlet box. Lower the screw collar ring (H) and canopy (A) over the chain (K).

6. Wire connection guide:
   Ground wire:

   • For Installation In the United States: Wrap ground wire from outlet box around ground screw reassembled on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA).

   • For installation In Ca nada: If the fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw. Connect fixture ground wire to outlet ground wire with the wire connector (AA).
     Supply wires:

   • Connect the Neutral (White) supply wire from the outlet box to the Neutral fixture wire (White or Parallel Cord “D” shaped and ribbed).

   • Connect the Hot (Black) supply wire from the outlet box to the Hot fixture wire (Black or Parallel Cord round and smooth).

   • NOTE: Fixture wires will either be:

   • Black and White.

   • Parallel Cord SPT-1 lamp wire with one round smooth wire and one “D” shaped ribbed wire.
     Hardware Used: AA Wire Connector x 3

7. Pass canopy (A) over the screw collar loop (I). Attach screw collar ring (H) to screw collar loop (1) to secure canopy (A).

8. Insert 60-watt max. candelabra-base incandescent bulb or CFL/LED equivalent (none included) into socket (E).

CARE AND MAINTENANCE

• Always be certain that electric current is turned off before cleaning this item.
• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish.
• All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher.

TROUBLES HOOTING

WARRANTY

Parrot Uncle warrants that Its products will be free from defects In material and workmanship for one (1) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the original Purchaser shall return any allegedly defective parts or products to the authored Parrot Unde warehouse that the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect. any of the warranted products are found by Parrot Uncle, in its sole discretion, to be defective, such products MII, at Parrot Uncle’s sole option and cost, be replaced, repaired or refunded less an amount directly attributable to Original Purchaser’s prior use of the product. Parrot Uncle will return the repaired or replaced product prepaid freight. This warranty does not cover labor or other costs or expenses to remove or Install any defective, repaired or replaced product. The parties here to expressly agree that Original Purchaser’s sole and exclusive remedy against Parrot Uncle shall be for the repair, replacement or refund of defective products as provided here In. This warranty extends only to product ownership by the Original Purchaser; Is not transferable or whether to heirs, subsequent owners, or otherwise; and is void If the Original Purchaser ceases to own the product. This warranty does not apply to any products that have been to subject to misuse, mishandling, misapplication, connected to the voltage at more than 5% above standard North American voltage, unusual use (Including but not Imited to use In an environment where the annual average amblent operating temperature Is below 27 or above 95 degrees Fahrenheit), neglect (Including but not Imited to improper maintenance), accident, acts of god such as high winds, improper installation or care, failure to follow the Product’s written instructions for normal use and care, improper packaging of products returned to Parrot Uncle, modification (Inducing but not Imited to use of unauthorized parts or attachments), or adjustment or repalr. Significant product exposure to chemicals, harsh cleaners, salt water or salt air wil void any and all warranties on exterior finishes. This warranty only applies when all components, including transformers, have been provided by Parrot Uncle. Substituting another manufacturer’s product and/or components will render the warranty completely cold. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OFINCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THE FOREGOING WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR INFRINGEMENT. ORIGINAL PURCHASER SHALL N NO EVENT BE ENTITLED TO, AND PARROT UNCLE SHALL NOT BE LIABLE FOR, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, INCLUDING, BUT NOT LIMITED TO LOSS OF PROFIT, PROMOTIONAL AND/OR MANUFACTURING EXPENSES, OVERHEAD, INJURY TO REPUTATION AND/OR LOSS OF CUSTOMERS.

• Installation & Operating Instructions for the
• Parrotuncle Owner’s Installation,Manual
• WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>