Banalsite Cadmium P3A7EN Wi-Fi Indoor Air Quality Monitor User Manual
- June 6, 2024
- Banalsite Cadmium
Table of Contents
Banalsite Cadmium P3A7EN Wi-Fi Indoor Air Quality Monitor
User Manual
Product Information
Product Model Number
P3A7EN
Product Description
This device is Wi-Fi Indoor Air Quality Monitor (QAM), it will measure five parts of indoor air quality: temperature, humidity, dust (particulate matter), volatile organic compounds (VOCs), and carbon monoxide (CO)
- Nominal Operating Voltage and Current: 5V – 1A
- Nominal Operating Temperatures: 0°C to 35°C
Safety and Compliance Information
Using Your Device Around Other Electronic Devices
The Device uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio ommunications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals if in doubt, check with the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals.
There are some places where RF signals could constitute a hazard, such as health care facilities, and construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile phones should be turned off.
FCC Compliance Information
Radio Frequency Information
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications that are not expressly approved by the party responsible for compliance could make the device no longer comply with the FCC Rules.
Information on your device is on file with the FCC and can be found by inputting your device’s FCC ID, which can be found on the back of Device, into the FCC ID Search form available at transition.fcc.gov/oet/ea/fccid.
Information Regarding Exposure to Radio Frequency Energy
This equipment complies with RF exposure limits set forth for an uncontrolled
environment.
This equipment should be installed and operated with a minimum distance of 20
cm between the radiator & your body.
IC Compliance Information
Radio Frequency Information
This device complies with Industry Canada’s license-exempt RSSs. Operation is
subject to the following two conditions:
(1) This device may not cause interference; and (2) This device must accept
any interference, including interference that may cause undesired operation of
the device.
The device could automatically discontinue transmission in case of the absence of information to transmit or operational failure. Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where required by the technology.
Information Regarding Exposure to Radio Frequency Energy
This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator & your body.
Recycling Product Properly
In some areas, the disposal of certain electronic devices is regulated. Make sure you dispose of or recycle the Products in accordance with your local laws and regulations. For information about recycling the Products, go to www.amazon.com/devicesupport.
Product Specifications
Model Number: P3A7EN
Power: 5V – 1A (Power adapter in box)
Operating temperature: 0°C to 35°C
Connectivity: 1×1 SISO 2.4 GHz 802.11 b/g/n HT 20 only, BT: BDR/EDR, BLE
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>