G-Force Bike S23 User Manual

G-Force Bike S23

Thank you for your purchase
Thank you for purchasing 523, this is an electric bicycle for riding without chains.

Package content

Assemble the electric bicycle

Product Overview

Accessories

tool
charger

Please check the items in the package carefully. If any items are missing or damaged, please contact customer service for support.

Battery level display
he battery power is indicated by the four power indicators on the control panel. As the power is consumed, the indicator will change from steady to blinking, and finally from off to off. When all four power indicator lights are on, the battery charge is between 100% and 76%; when the three lights are on and one light is blinking, the battery charge is between 75% and 51 %, and so on . When the bottom power indicator flashes, it indicates that the power supply is insufficient. Please charge as soon as possible for future use. After the battery is exhausted, all the lights will go out and the electric bike will coast until it stops completely.

Gear display
1-3 represents three gears. The first gear is the slowest and the third gear is the fastest.

Power button
Press and hold the key to turn on off the power.
With the power on, short press the key once to turn the lights on / off.
The first button on the instrument is the start/stop button ,a ndtheseco nd button is:
The” M “key ist he speed button, The riding speed is different with each press. 0-1-2-3gear, O
gears no power,turning the throttle electricbike is not power.Switch the speed gear according to the riding-

Assembly and setting

1. Lock the body folding buckle
2. Adjust the seat tube to a suitable height, and then tighten the caliper. When the seat tube still sways or slides down when the locking clamp is encountered, you can hold the screw end of the clamp with one hand and turn the handle of the clamp to adjust the tightness with the other hand.
3. Whether the group is installed or not, often press the industrial power source button to check

Charge the bicycle

2.Step on one foot with one foot and keep the other foot on the ground

How to ride

1. Turn on the electric car, and then check the remaining power
2. Step on one foot with one foot and keep the other foot on the ground

Safety instructions

safety warning

1. This electric bicycle is a short-distance transportation with electric power assistance. For the sake of safety, please follow the regulations in the manual and traffic regulations that instruct the government and regulatory agencies. (Instructions or instruction manuals, catalogs, manuals and manuals, weekly, weekly, organisms, weekly).
2. At the same time, you should understand that the risk cannot be completely avoided because other people may violate traffic laws and drive carelessly, and just like when walking or riding a bicycle, you are vulnerable to road traffic accidents. On a slippery surface, it may slip, lose balance, or even cause a fall. Therefore, it is important to proceed with caution and maintain proper speed and distance, especial­ly when you are not familiar with it. This is crucial to this place.

• Respect pedestrians’ right of way. When driving, especially children, don’t scare them. When you ride from behind a pedestrian, please ring the bell to remind others, and let your scooter pass from the left (applicable to countries with vehicles) When you cross the pedestrian, you should keep the right speed at a low speed

• When you cross pedestrians, please keep the minimum speed or get off.
  Do not rent electric bicycles to people who do not understand their operation. When you rent it to your friend, you are responsible for making sure that he/ she knows its operation and wears safety equip­ment.

• Please check the scooter before each use. When it is found that the parts are loose, the battery is low, the tire is leaking, excessive wear, strange sounds, malfunctions and other abnormal conditions, please immediately stop riding and seek professional support.a Warning-fire risk-users are prohibited from servicing partso

Fold and carry

Make sure the electric car is turned off. To fold, unlock the folding mechanism, 1. Open the folding buckle of the riser before bending the handlebar; 2. Open the seat tube lock; remove it from the buckle, erect the handlebars and lock the folding structure

fold
carry

Daily maintenance

About charging

1. When the input and output terminals of the charger are connected, the red indicator of the charger lights up to indicate normal charging.

2. Standard charging time: charge according to the specified time of the special matching charger. The ambient temperature is about 25 °C, and the charging time of the lithium battery is 3-8 hours, the green indicator light indicates that the battery is fully charged, you should immediately unplug the charger to stop charging.
   The larger the battery capacity, the longer the charging time.

3. If the battery temperature exceeds 40 ° C in summer, you need to suspend charging, and continue charging after the temperature drops. To charge in winter, the battery should be charged one hour after being built in the room. The charging time is 5-10 hours.

4. Although this charger has an overcurrent protection device, it should not be charged for a long time due to the chemical nature of the lithium battery. Otherwise, it may cause the battery performance to decay too fast, or even cause a fire.
   

Charging considerations

1. When charging, please put it in a safe place out of reach of children.
2. Warning, users must follow the instructions when charging, otherwise the consequences will be at your own risk.
3. Prompt that the original charger must be used.
4. Pay attention to the type and applicable voltage of the battery that the charger can charge, and it is strictly forbidden to mix.
5. When charging, it should be placed in a ventilated environment. It is strictly forbidden to charge in confined spaces or in the hot sun and high temperature environment. Do not place the charger in the saddle or the tail box for charging.
6. When charging, insert the battery first, and then connect the power supply; when sufficient, cut off the power supply first, and then pull out the battery connector.
7. When the green light is on, the power supply should be cut off in time. It is forbidden to connect the charger to the AC power supply without load for a long time without charging.
8. During the charging process, if the indicator is abnormal, there is an odor or the charger shell is overheated, the charging should be stopped immediately, and the charger should be repaired or replaced.
9. During the use and storage of the charger, pay attention to avoid the entry of foreign objects, especially to avoid the inflow of water or other liquids, so as not to cause a short circuit inside the charger. The charger should not be carried with the vehicle as much as possible. If it is really necessary, it should be placed in the tool box after shock absorption.
   10. Do not disassemble or replace the components in the charger by yourself.

Precautions during riding

1. When the vehicle is just started, it should be slowly accelerated to avoid excessive rapid start­ing current causing excessive starting current and wasting electrical energy, and auxiliary pedal starting is better.
2. In order to protect the battery and motor, please use the foot to assist when the vehicle starts or climbs the hill.
3. Under the premise of ensuring safety, you should drive at economic speed as much as possi­ble. And try to avoid frequent braking or frequent start to save energy.
4. During driving, the phenomenon that the speed control lever is still tightened after braking should be avoided to avoid overloading the motor and damaging other mechanical parts.
5. The controller of this car is equipped with overload protection function. The power supply will be cut off automatically when overloaded, and the power supply will be automatically switched on when it returns to normal.
6. The maximum load capacity of this vehicle is 150Kg (including the weight of the rider). Do not overload.
7. When driving on muddy or uneven roads, try to use human power as much as possible.
8. When it is found that there is electricity and can not drive, the power should be turned off to ride, so as not to damage the electrical components.
9. The order of front and rear brakes: brake first, then brake, then brake first or front brake only.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>