Visual World SMART DETECTOR User Manual
- June 5, 2024
- Visual World
Table of Contents
Visual World SMART DETECTOR
Product Description
Product Brief
This is an intelligent device for rapid temperature detection in public
places. This product adopts a high-performance AI algorithm chip solution,
equipped with an industrial-grade binocular camera and infrared thermal
imaging module on the Android 9.0 system. The device uses face biometric
recognition technology and supports a 30,000-level
face database, binocular biometric recognition, and millisecond judgment. The
product supports functions such as body temperature detection, Attendance, and
Access control.
It is a safe, efficient, and accurate temperature detection product. It can
also be used for access control of face recognition (optional).
Application scenario
Product Specification
Products Series CXB.A905
Items| Configuration
Camera
| Resolution| 200W Pixel
Type| Binocular wide dynamic camera
Aperture| F2.4
Focus Distance| 50-150cm
White Balance| Auto mode
Fill-in Light| LED & IR
Panel
| Size| 8” LCD
Resolution| 800×1280
Touch| Optional
Performance parameter
Connector
| CPU| 4A55
GPU| ARM G31 MP2
NPR| 1.2TOPS
DDR| 1GB（Optional 2GB）
Storage| EMMC 8G
Internet| Ethernet, 2.4G Hz WIFI
Audio| Max 3W/8Ω
USB| 1 USB
UART/RS232| 1 UART/RS232
Relay Output| 1 Relay Output
Wiegand| 126/34 input or output
Ethernet| 1RJ45
Foundation
| ****
Face detection
| ****
Binocular Biometric Recognition
Face Database| Max 20000
1：N face recognition| Support
1:1 face contrast| Support
Stranger Detection| Support
Recognition Distance| Support
| Setting|
---|---|---
Access Control| Support
Temperature detection| Support
Night Induction| Support
Face Detection with Mask| Support
UI configuration| Support
OTA| Support
Infrared Thermal Imaging Module
| Face Temperature
Detection
| Support
Temperature Detection
Distance
| 0~80cm
Temperature Accuracy| ≤ ±0.2℃
Temperature Range| 32~43℃
Ambient Temperature| 0℃~50℃
Ambient Humidity| 10~95%RH
Alarm Function| Support
Power| DC12V（±10%）
Ambient Temperature| 0℃~50℃
Storage Temperature| -20℃~60℃
Power Consumption| 13.5W（Max）
Install Way| Gate Bracket / Wall Mounting
Size| 129.2033.50270.00mm
Weight| 0.860kg
Packing List| Device 1,Spec1,Quality Certification *1
Product Picture
The above product shape and interface descriptions are for reference only, products are subject to change without notice.
Installation Notes
- Position and mark the 4 holes of the wall bracket on the wall (marked in a red circle)
- Drill the holes on the wall and fix the plastic expansion bolts in the positioning holes on the wall at one time.
- Use 4 countersunk head tapping screws to fix the wall bracket on the wall.
- Hang the device on the hook of the wall bracket
- Fix the holes on the bottom of the device with screws (marked with red circles). PS: The wall bracket is recommended to be 1.35 M above the ground.
Installation and Maintenance Statement
- Open the box to check whether the appearance of the product has an obvious quality issue, such as damage, serious scratches, etc.
- This product uses anti-static packaging, please pay attention to electrostatic protection at any time.
- When installing on the gate, please make sure the product is firmly installed.
- Installation sequence: connect the signal cables between the components first, and then connect the power cables. Before the power cable is connected, please make sure all components are properly connected.
- During the installation, all electrical safety regulations of the country and the area of use must be strictly observed. When inserting the plug into the socket, they must be. After checking the correct connection, tighten the plug screws to ensure a stable connection.
- Please use the power adapter provided by a regular manufacturer. It is required that the power plug is not easy to loosen after plugging in, and the ground wire must be connected reliably.
- The installation should be carried out without power, and it is forbidden to plug and pull.
- Boot sequence: Connect AC power first, and then turn on the power of the product.
- Under the Android system, please use the shutdown command provided by the system (“On”-> “Off”). It is strictly forbidden to shut down without exiting the system, which may damage the system software or even the machine.
- You are responsible for properly configuring all passcodes and other related product security settings, and keeping the account user name and password of the manager authority properly.
- If the equipment is not working properly, please do not disassemble and repair it by yourself, otherwise, it will affect the equipment warranty.
- Avoid extreme environments such as extremely high temperature (or low temperature), high humidity, vibration, radiation, chemical corrosion, etc. during installation and use.
- Machine maintenance requires professional personnel from our company or personnel trained by our company to operate, to avoid unnecessary dangers
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum
distance of 20cm between the radiator & your body.