UREVO URTM013 Strol U1 Walking Machine User Manual

URTM013 Strol U1 Walking Machine
User Manual

Important safety instructions

DANGER – To reduce the risk of electric shock:

1. Always unplug this appliance from the electrical outlet immediately after using and before cleaning.
   WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:

2. An appliance should never be left unattended or plugged in. Unplug from outlet when not in use, and before putting on or taking off parts.

3. Do not operate under a blanket or pillow. Excessive heating can occur and cause fire, electric shock, or injury to persons.

4. Close supervision is necessary when this appliance is used by, on, or near children, invalids, or disabled persons.

5. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.

6. Never operate this appliance if it has a damaged cord or plug if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to a service center for examination and repair.

7. Do not carry this appliance by supply cord or use the cord as a handle.

8. Keep the cord away from heated surfaces.

9. Never operate the appliance with the air openings blocked. Keep the air openings free of lint, hair, and the like.

10. Never drop or insert any object into any opening.

11. )Do not use outdoors.

12. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.

13. Caution – To reduce the risk of injury from moving parts – Unplug before servicing

14. Warning – To reduce the risk of Electric shock – Unplug before cleaning or servicing.

15. )Warning – Risk of personal injury – Keep children under the age of 13 away from machines.

16. To disconnect, turn all controls to the position, then remove the plug from the outlet.

17. Connect this appliance to a proper outlet only. See grounding instructions.

18. This appliance is not intended for use by persons with reduces physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Keep children under the age of 13 away from this machine.

SAVE THESE INSTRUCTIONS

GROUNDING INSTRUCTIONS:
This product must be grounded. If it should malfunction or break down, grounding provides a path of the least resistance for electric current to reduce the risk of electric and a  grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
DANGER – Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly grounded. Do not modify the plug provided with the product – if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

1. If the supply cord is damaged, it must be replaced by a special cord set available from the manufacturer or its service agent.

2. The free area shall not be less than 0.6 meters greater than the training area in the directions from which the equipment is accessed.
   

3. If any of the adjustment devices are left projecting, they could interfere with the user’s movement.

4. Noise emission under load is higher than without load.

5. On airborne noise: ≤65dB.

6. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

Welcome to use

Thank you for choosing the UREVO Walking device, hereinafter referred to as a Walking device, which possesses various advantages including exquisite, concise, innovative integral design. From now on, enjoy the quality of life of walking at home.

Performance indicators| Detailed parameters| Performance indicators| Detailed parameters
---|---|---|---
Product dimension| 148.5 x 55.2 x 10.7cm| Minimum speed| 0.8km/h
58.5.21.73.4.21 inch| 0.5 mph
Walking Area| 120.42cm| Maximum speed| 6km/h
47.24.16.54 inch| 4 mph
Gross weight| 30kg| Rated voltage| 110-120V 50-60Hz
66.14 Lbs
Net weight| 25kg| Screen size| 10.5.5 cm
55.11 Lbs| 3.94.2.17 inch
Maximum load| 120 kg| Power input| 560W
264.5 Lbs| Suggested age| 14-60 years old

Product and Accessories

Please carefully check whether the contents of the package are complete and intact If there is any missing or damaged, please contact the seller.

Function schematic diagram

1. Product main body
   

2. Introduction of the function of the indicator panel
   

3. Walking device remote controller

Guide for initial operation

How to use

1. Ensure that the machine is powered on and the remote control is installed with a battery

2. Functions
   Controller icon| Function| Operation| Note
   ---|---|---|---
   +| Add speed| Click| Long press over 0.5 seconds, the speed constantly add.
   | Start| Click| Start the machine
   Close| Long press 1.2″| Close the machine(all data recover to 0), and the screen will show “END”, 10 mins later, the system will change to the economic mode, turn off the screen, and all the data will recover to O; press any key to activate the system, enter into the standby mode.
   Pause| Click
   (in start mode)| 1, When pause mode within 10 mins, the screen will show “PAU”, the time/step/- calorie/distance, data will retain display, and the speed will start from the minimum speed.
   2, When pausing mode for over 10 mins, the system will change to the economic mode, turn off the screen, and all the data will recover to °press any key to activate the system, and enter into the standby mode.
   —| Reduce speed| Click| Long press over 0.5 seconds and the speed is constantly reduced.

3. Remote control pairing
   A. Long press the start-stop button of the remote control and turn on the power switch of the machine at the same time. After 6 seconds, the machine will emit a  beeping sound, which means the pairing is successful.
   B. When the remote control does not respond or replace with new remote control, perform the above operations.

4. Error Warning Light
   When an error occurs, error warning light turns on and shows its error code.

Safety notice

![UREVO URTM013 Strol U1 Walking Machine

• Safety notice 3](https://manuals.plus/wp-content/uploads/2022/06/UREVO- URTM013-Strol-U1-Walking-Machine-Safety-notice-3.jpg)

Maintenance and Service

1. Clean the walking machine

2. Adjust the belt

3. Lubricate the belt

• Turn off the machine and unplug the power cord.
• Add several drops of detergent to a 100% cotton rag or towel. Don’t pour the detergent on the belt directly, and don’t use acid or corrosive cleaners.
• Wipe off dust and stains on the frame, front panel and belt Do not wipe the backside of the belt
• After using for a period, dust and stains may appear on the back part, which is a normal situation. Just clean them up.
• The speed is 4 km/hr. In time, stand at the back of the walking device to adjust it.
• If the belt deviates to the left: Turn the left adjusting screw for a half-circle clockwise.
• If the belt deviates to the right Turn the right adjusting screw for a half-circle clockwise.
• If the belt is slipping: Turn both left and right adjusting the screw for a half-circle clockwise at the same time.
• Keep the machine running for 1-2 minutes and check whether it needs to readjust.
• Press the “Start/Stop” button to exit the calibration mode.
• Turn off the machine and unplug the power cord.
• Lift up the belt and apply silicone oil on the backside of the belt.
• Turn on the machine again
• Keep the machine running under 4 km/hr for 10-20 seconds.
• Only apply 5 ml -10 ml lubricant oil each time, too much lubricant oil makes the belt become slipping. Apply for silicone oil once every 30H or 1 month,or when you feel big friction or noise, add lubricating oil.
  30H or 1 month, or when you feel big friction or noise, add lubricating oil.

Trademark and Legal Declaration

Shanghai Runmi Technology Co., Ltd. holds the patents for the U’REVO Walking device series products.
Shanghai Runmi Technology edits and owns the copyright of this manual book. Without Shanghai Runmi Technolo­ guy’s written permission, any form of unauthorized distribution, reproduction, publication, release or quotation by any institution or individual is prohibited.
This manual contains as many as possible of all the functions and instructions for use. However, due to product imperfections, design changes, etc., the description may still have discrepancies with what you have purchased. In view of product updates, descriptions in this manual book may differ from what you have purchased in color; appear­ ance,  etc. Actual supplies prevail.

Replacement and Disposal

The battery contained in this appliance must be removed for disposal.
When replacing the battery, use only the original battery, available from our online parts shop.
The battery compartment is located on the underside of the appliance. Open the compartment by removing the screw in the cover using a suitable screwdriver, and then press the lower end of the locking catch on the connec­ tors. In that way, both sides of the connection can be separated by pulling them apart.
When inserting a new battery, push together the two connectors and ensure that the catch locks over the stop.
Never dispose of old batteries in domestic garbage, but only through the proper public collection points. This also applies to the battery of defective appliances.

Devices marked with this symbol must be disposed of separately from your household waste, as they contain valuable materials which can be recycled. Proper disposal protects the environment and human health. Your local authority or retailer can provide information on the matter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>