EURofase 45717 Bruco LED Island Chandelier Instruction Manual
- June 13, 2024
- EUROfase
Table of Contents
EURofase 45717 Bruco LED Island Chandelier
Product Information
The product model number is 45717. It belongs to the BCD H series and has the dimensions of A x GFE. The product is designed with the following specifications: 8, 6, 1, 64, ~, 3, 64, ~, 64, ~, 5, 4, 7, 8, 6, 6, 9, 2, 12, 11, 10.
Product Usage Instructions
- Ensure that you have all the necessary components and accessories for the product.
- Place the product on a stable and flat surface.
- Connect the necessary cables and power source to the product.
- Turn on the power switch located on the product.
- Follow the on-screen instructions or refer to the user manual for further setup and configuration.
- Once the product is set up, use the provided controls or interface to navigate and interact with the features and functions.
- Refer to the user manual for detailed instructions on how toutilize specific features or troubleshoot any issues.
- When finished using the product, properly shut it down or disconnect the power source.
- Clean and maintain the product according to the guidelinesprovided in the user manual.
Please note that these are general usage instructions. For specific information or troubleshooting, refer to the user manual or contact our customer support.
Thank You
Thank You You’ve just purchased a lighting product designed and built to provide you with years of enjoyment.
Using Instructions
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL certified wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly
Tools Required For Assembly (not included)
- Flathead screwdriver,
- Philips screwdriver,
- Pliers,
- Electrical tape and Wire cutters.
Helpful Tools (not included)
- Wire strippers,
- Ladder
Installation Instructions
- 64 W MAX, LED, 120V~, 60Hz
- (Dimmable LED Included)
- A- Outlet Box screw x 2
- B- Black wire(L) from junction box
- C- White wire(N) from junction box
- D- Green wire/Bare copper (G) from junction box
- E- Black wire (L) from fixture
- F- White wire (N) from fixture
- G- Green wire/Bare copper from fixture
- H- Wire connector x 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>