gosund SP111 Smart Plug User Manual

Smart Plug SP111

SP111 Smart Plug

Any problems please follow Gosund on and consult the service staff

What’s In the Box

1. SmanPlug
2. User Manual

At a Glance

1. ON/OFF Button
2. Flame Resistant Material
3. Power Plug
4. Socket Panel

Note:
Socket can be controlled individually. You can also control it individually in APP.

Specification

Model: SP111
Input: 250V∼, 50Hz
Output: 16A Max.
Material: PC (VO Fireproof, UV resistant)
Wi-Fi Network: 802.11 b/g/n,2.4GHz(only)
Product Size: 4.5×4.5x7cm

Main Features

Reset

• Tum on tre power, hold the button for 5 seconds till the sooket led starts to flash. The reset is successful.
• When the socket is in a new- network environment, you need to restore the factory settings, and 1hen reconnect to the network.

Warnings and Precautions Important!

• Keep it out of the reach of children and pets.
• Do rot use this prcduct in humid environments cr outdoors. It’s for indoor use only.
• Do not place this prOOuct near heating devices, such as microwave ovens, or radiators.
• Protect the product from extreme temperature direct sunright, stroog jolts t;gh humidity, moisture, fmrnable gases, vapors and solvents.
• Do not disassemble, modify, or repair your device, and ask help from the authorized professionals for device malfunction.
• Do rot use tre device when It is no longer workirg properly or visibly damaged.
• Do rot store the device for extended perbds in poor ambient conditions.
• Do mt insert your device to ano1her one.
• Never use aggressive detergents such as rubbing alcd”ol or other chemical solutions because these could damage the casing or even impair the functioning of the prodl..ci.
• Do mt connect in series.
• Do mt cover the product when in use.
• No voltage or1y when unplugged.

How to download the APP?

Optkm1: Search for “Gosund” in the Appka APP Store or Google Play.
Opton2: Scan the QR code to enter the download page.
https://smartapp.tuya.com/gosundsmart
After download APP and login, make sure the indicator under blinking, then please use our APP ‘Add device’ then scan the QR code and get into Quick Pairing, connect the device and APP. If you meet any issue, contact us via official website or APP.
https://smartapp.tuya.com/s/p?p=37mnhia3pojleqfh&v=1.0
Binding Voice Assistants Guide Since the device only supports 2.4G Wi-R connection, please ensure that the mobile phone and the device are connected to 2.4G Wi-Fi simultaneously.

How to Connect Gosund Devices to Alexa

Note:

1. Rease download the Amazon Alexa APP l:efore connecting, and make sure that the Alexa account is sc.ccessfully logged in.
2. Make sure that the Alexa speaker and the devkoe to be bound are powered on and connected to the Wi-Fi net.v,,,ork

Method 1: Bind quickly via Gosund APP

1. Open tre Gosund APP, click ‘Me’ n tre lower right comer, and then click the ‘Alexa’ icon in the ‘Third-Party Voice Services’ menu.
   Note:
   Please updale the APP to versbn 3.22.5 or above.

2. Click ‘ Sign In With Amazon’ at the bottom of the page.

3. Click ‘LINK’ at the bottom of the page.

4. Bind successfully, the device can be controlled by Alexa.

Method 2: Add skills via Alexa APP

1. Open Amazon Alexa APP and select “skills & Games”, as shovvTl in the figure bebw.
2. Click “Search” icon and enter “Gosund’, as shONn in the follarving figure.
3. Find “Gosund’, click “enable” and ca,tact your Gosund account to enable skill. As sl”otvn in the figure below:
4. Then the device can be controlled through Alexa.
5. Now you can begin your smart home journey.

How to Connect Devices to Google Assistant

Note: Support 2.4GHz Wi-R only.

1. Open the Google Assistant APP and login in.
2. Tap your account name of the upper right comer.
3. Click “Devices” to add devices.
4. Find “Link a smart home device” and click it
5. Enter “Gosund” to search and click the ·Gosund smart”.
6. Enter your Gosund APP account and password, then tap “Link Now”.
7. Now you can begin your smart home journey.

For more operation videos, please scan the QR code below. http://qr14.cn/AKIJaq

WEEE Disposal and Recycling Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.
The full content of the Declaration of Conformity can be found on the website at: https://files.innpro.pl/Gosund

FAQ:

. “” answer-0=”Anaver. 1) Please ensure the wifi connection Ls stable and the router is not far or overloaded. Please restart your router a connect the device to a mobile wifi hotspot to see if it works. 2) Please remove the device from the App. Click the device name ->click on edit loon (at top right)->click Remove Device (at the bottom)-> Discomea and wipe data’. 3) Please reset it before connecting it to the App again. Simply press the power button (for about 10 seconds). The smart plug hdicata will blink rapidly(EZ mode) a slowly (AP mode). ” image-0=”” headline-1=”p” question-1=”Question: Smart plug will tum cn and off by itself randomly. What should I do to fix this? ” answer-1=”Answer 1) Please check first have y011 set any schedules fa ON/OFF on APP ? 2) Could you please try the below steps to plug it in another socket? a Please remove the device from the app. Click the device name ->click on edit icon (at top right)->click ‘Remove Device (at the bottom)-> ‘Disconnect and wipe data”. b: Please reset it before connecting it to the app again. Simply press the power button (for about 10 seconds). The smart plug indicator will blink rapidly(EZ mode) or slowly (AP mode). c: If the issue persists, please restart your router or connect the device to a mobile wifi hotspot to see if it works. ” image-1=”” count=”2″ html=”true” css_class=””]

Shenzhen CUCO Smart Technology Co., Ltd.
Address: Room 201. 301. Building A, No.12, Difu Road, Guxing
CcmTtl.lnity, Xixiang Street, Baoan District, Shenzhen
Website: www.gosund.net
Email Support: service.eu@goound.com
4.02.000.0829 V2.0

References

• INNPRO Sp. z o.o. Files
• Gosund
• the Yaus Family Server

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>