Keilton CS107D Dual Mode Line Voltage Ceiling Sensor User Manual
- June 13, 2024
- Keilton
Table of Contents
Dual Mode Line Voltage Ceiling Sensor User
CS107D V1.0 User Manual
WARNING: May result in serious injury or death. Turn off power at circuit breaker before installing the unit.
COVERAGE PATTERN
The CS107D provides a 360° coverage pattern. The coverage shown represents
walking motion at mounting height of 8 feet. For building spaces with lower
levels of activity or with obstacles and barriers, coverage size may
decrease.
Placement Guidlines
Depending upon obstacles suchas furniture or partitions, the area of coverage
may be less or more than the sensing distances shown in the coverage pattern.
This must be considered when planning the number of sensors and their
placement. It is also recommended to place the sensor 4 to 6 feet away from
air supply ducts as rapid air currents or the differences in temperatures may
cause false activations.
Mount the sensor to the ceiling. The CS107D Is designed for a ceiling height
of about 8-10 feet. Mounting above or below this range will significantly
affect the coverage patterns. Be aware that as you decrease the mounting
height, you decrease the range and increase the sensitivity to smaller
motions. Conversely, when you increase the height, you increase the range and
decrease the sensitivity to smaller motions. At heights of more than 12-14
feet, you may start to significantly reduce sensitivity. As a general rule,
each occupant should be able to clearly view the sensor.
Often the best location to install a CS107D ina closed office is off-center
(see Figure 2). Avoid placing a sensor directly in line with an open door
through which it has aclear view out, as the sensor may detect people walking
by.
Open Office Area Coverage:To get complete coverage in an open office area,
install multiple sensors so that there is an overlap with each adjacent
sensor’s coverage area.See the Figure 3.
For large areas of coverage use multiple sensors.
Warning
Refer to the wire diagram of the sensor and connect the wires of ceiling
sensors as followed by using the wire nuts provided.
- Connect the Hot wire to the Black wire from the sensor.
- Connect the Load wire to the Red wire from the sensor.
- Connect the Neutral wire to the White wire from the sensor.
TIPS: This Bluetooth device
is compatible with Keilton lighting control system only.
Mounting
Using an Octagonal Junction Box
- Pull the high voltage wires into the J-Box through the conduit knockout.
- Connect the high voltage wires to the appropriate terminals on the sensor.
- Loosen the appliance mounting screws attached to the J-Box.
- Align the sensor in the J-Box so that the mounting screws on the box match the key holes on the sensor’s rear housing.
- Push the sensor up into the J-Box and twist it so that the mounting screws are seated inthe keyhole slots.
- Tighten the two screws to secure the sensor to the J-Box.
- Snap the front cover onto the sensor.
How to Install Keilton APP?
Scan below QR code for downloading the APP.
https://itunes.apple.com/cn/app/keilton/id1423982372?mt=8
https://play.google.com/store/apps/details?id=com.litetrace.keilton.bluetooth.light3
How to Control Lights with a Phone?
Scan to download Keilton APP instruction
https://keilton.s3.amazonaws.com/Keilton+App+Instruction.pdf
WARRANTY INFORMATION
Our company warranties this product to be free of defects in materials and
workmanship for a period of five(5) years.There are no obligations or
liabilities on the part of our company for consequential damages arising out
of, or in connection with, the use or performance of this product or other
indirect damages with respect to loss of property, revenue or profit, or cost
of removal, installation or reinstallation.
Contact: [email protected]
V202211
Documents / Resources
|
Keilton CS107D Dual Mode Line Voltage Ceiling
Sensor
[pdf] User Manual
2A26YCS107D, 2A26YCS107D, CS107D, CS107D Dual Mode Line Voltage Ceiling
Sensor, Dual Mode Line Voltage Ceiling Sensor, Mode Line Voltage Ceiling
Sensor, Line Voltage Ceiling Sensor, Voltage Ceiling Sensor, Ceiling Sensor,
Sensor
---|---