Keilton WP1017S Line Voltage 7 Key Scene Controller User Manual
- June 13, 2024
- Keilton
Table of Contents
Line Voltage 7-Key Scene Controller
WP1017S V1.0 User Manual
WARNING: May resultinserious injury or death. Turn off power at circuit breaker before installing the unit.
FEATURES
- Network technology for Bluetooth enabled IOS or Android smartphone. Linkable with light groups.
- Manual On/Off/Dim & 4 scenes control of any connected load.
- Compatible with Kelton devices.
SPECIFICATIONS
Voltage | 120/277VAC,50/60Hz |
---|---|
Wattage | 0.07W |
Wire Strip Length | 16mm(5/8 in.) |
Transmit Line distance | 100ft |
Operating Temperature | 32°F -104°F |
WIRING
- Remove wall plate, switch mounting screws.
- Carefully remove the switch from the switch box. DO NOT disconnect the wires.
- There are three wiring connections on the switch, these are marked HOT, NEUTRAL, GROUND.
- Disconnect the wires from the existing switch.
- Connect the green wire to the GROUND terminal.
- Connect the white wire to the terminal marked NEUTRAL.
- Connect the black wire to the terminal marked HOT.
- Check connections to be sure they are tight and no bare conductors are exposed.
- Insert the switch into the outlet box carefully.
- Make sure the switch to the box using the supplied screws.
- Attach the wall plate.
- Restore power to the circuit breaker and test the system.
TIPS: This Bluetooth device is compatible with Kelton lighting control system only.
- Wire Strip Length; 16 mm (5/8 in.)
- The device shall install ina standard outlet box.
COMMISSIONING
1. sent | 5. DIM+ |
---|---|
2. scn2 | 6. DIM- |
3. scn3 | 7. ON/OFF |
4. scn4 |
- Follow the instruction to connect Bluetooth Wall Switch to the lights.
- Press button 5 and 6 over 3 seconds to enter pairing mode and achieve reset function. This switch can be scanned in next 30 seconds.
- In Kelton App “Switch” page, click to add the switch.
- Select the light/light group to be controlled by this switch.
- Detail operation please refer Kelton APP instruction.
How to Install Kelton APP?
Scan below QR code for downloading the APP.
|
---|---
https://itunes.apple.com/cn/app/keilton/id1423982372?mt=8|
https://play.google.com/store/apps/details?id=com.litetrace.keilton.bluetooth.light3
How to Control Lights with a Phone?
Scan to download Kelton APP instruction
https://keilton.s3.amazonaws.com/Keilton+App+Instruction.pdf
WARRANTY INFORMATION
Our company warranties this product to be free of defects in materials and
workmanship for a period office(5) years. There are no obligations or
inabilities on the part of our company for consequential damages arising out
of, Orin connection with, the use or performance of this product or other
indirect damages with respect to loss of property, revenue or profit, or cost
of removal, installation or reinstallation.
Contact: sales@litetrace.com
FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: Reorient the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The distance between user and products should be no less than 20cm
V202210
Documents / Resources
|
Keilton WP1017S Line Voltage 7 Key Scene
Controller
[pdf] User Manual
WP1017S, 2A26YWP1017S, Line Voltage 7 Key Scene Controller, WP1017S Line
Voltage 7 Key Scene Controller, 7 Key Scene Controller, Scene Controller,
Controller
---|---