Keilton CS107S PIR Line Voltage Occupancy Ceiling Sensor User Manual
- June 13, 2024
- Keilton
Table of Contents
Kelton PIR Line Voltage Occupancy Ceiling Sensor
cs107s v1.0User Manual
Warning May result in serious injury or death. Turn off power at circuit breaker before installing the unit.
COVERAGE PATTERN
The CS107S provides a 360° coverage pattern, up to 1200 square feet. The coverage shown represents walking motion at a mounting height of 8 feet(See Figure 1). For building spaces with lower levels of activity or with obstacles and barriers, coverage size may decrease.
PLACEMENT GUIDLINES
Depending upon obstacles such as furniture or partitions, the area of coverage
may be less or more than the sensing distances shown in the coverage pattern.
This must be considered when planning the number of sensors and their
placement. It is also recommended to place the sensor 4 to 6 feet away from
air supply ducts as rapid air currents or the differences in temperatures may
cause false activations.
Mount the sensor to the ceiling. The CS107S are designed for a ceiling height
of about 8-10 feet. Mounting above or below this range will significantly
affect the coverage patterns. Be aware that as you decrease the mounting
height, you decrease the range and increase the sensitivity to smaller
motions. Conversely, when you increase the height, you increase the range and
decrease the sensitivity to smaller motions. At heights of more than 12-14
feet, you may start to significantly reduce sensitivity. As a general rule,
each occupant should be able to clearly view the sensor
Often the best location to install a CS107S in a closed office is off-center
(see Figure 2). Avoid placing a sensor directly in line with an open door
through which it has a clear view out, as the sensor may detect people walking
by.
Open Office Area Coverage: To get complete coverage in an open office area,
install multiple sensors so that thereis an overlap with each adjacent
sensor’s coverage area. See the Figure 3.
WIRING
Refer to the wire diagram of the sensor and connect the wires of ceiling sensors as followed by using the wire nuts provided.
- Connect the Hot wire to the Black wire from the sensor.
- Connect the Load wire to the Red wire from the sensor.
- Connect the Neutral wire to the White wire from the sensor.
TIPS: This Bluetooth device is compatible with Kelton lighting control system only.
MOUNTING
Using an Octagonal Junction Box
- Pull the high voltage wires into the J-Box through the conduit knockout.
- Connect the high voltage wires to the appropriate terminals on the sensor.
- Loosen the appliance mounting screws attached to the J-Box.
- Align the sensor in the J-Box so that the mounting screws on the box match the key holes on the sensor’s rear housing.
- Push the sensor up into the J-Box and twist it so that the mounting screws are seated in the keyhole slots.
- Tighten the two screws to secure the sensor to the J-Box.
- Snap the front cover onto the sensor.
How to Install Kelton APP?
Scan below QR code for downloading the APP.
|
---|---
https://itunes.apple.com/cn/app/keilton/id1423982372?mt=8|
https://play.google.com/store/apps/details?id=com.litetrace.keilton.bluetooth.light3
How to Control Lights with a Phone?
Scan to download Kelton APP instruction
https://keilton.s3.amazonaws.com/Keilton+App+Instruction.pdf
WARRANTY INFORMATION
Our company warranties this product to be free of defects in materials and workmanship for a period of five(5) years. There are no obligations or liabilities on the part of our company for consequential damages arising out of, or in connection with, the use or performance of this product or other indirect damages with respect to loss of property, revenue or profit, or cost of removal, installation or reinstallation. Contact: lightingpartner@vealite.com Tel: +86 574 8811 8550
FCC STATEMENT
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures: Reorient the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The distance between user and products should be no less than 20cm.
V202210
Documents / Resources
|
Keilton CS107S PIR Line Voltage Occupancy Ceiling
Sensor
[pdf] User Manual
CS107S, 2A26YCS107S, CS107S PIR Line Voltage Occupancy Ceiling Sensor, PIR
Line Voltage Occupancy Ceiling Sensor, Voltage Occupancy Ceiling Sensor,
Ceiling Sensor, Sensor
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>