Hunany anyidianzi shangwu youxian gongsi X13 TWS Bluetooth Headset User Manual

Hunany anyidianzi shangwu youxian gongsi X13 TWS Bluetooth Headset

Product Description

• Product name: X13
• Bluetooth version: 5.1+EDR
• Charging box (500MAH) headset battery (40MAH)
• high-performance polymer lithium
• Support agreement: Headset/Handsfree/A2DP/AVRCP
• Duration of continuous call: 3 hours
• Continuous playing time: 4 hours
• Standby time: 300 hours

Features

1. Power on: 1.1 In the power-off state, long-press the function” button until the blue light flashes, and the headset is turned on.

   • Take out the charging box and turn it on automatically. 2.

2. Shutdown:

   • Press and hold the power button for 5 seconds, the light is on, and the Bluetooth is turned off.
   • Auto power off when the headset is not connected to other
   • Bluetooth devices, the headset will automatically shut down within 5 minutes;

3. Answer the call: press the answer button on the mobile phone or short press the “function” button on the headset to answer the call;

4. Hang up the phone: press the answer key on the phone to hang up or short press the “function” button on the headset to hang up;

5. Reject the call: press the answer key on the phone to hang up or long-press the “function button of the headset to hang up for about 2 seconds;

6. Music playback: pause/play: click the “function” button to control the pause during music playback/play music.

7. Volume adjustment: the volume of the “function key on the left ear IS triple-cliCKed, and the volume on the right ear is tripled increase the volume of the “Function” key by one click. When you increase to the maximum volume, there will be the voice “Max Volume” displayed. (Continuously adjust the volume and pay attention to the middle interval of more than 1 second)

8. Up and down song: Double-click the next function of the left ear function” button. Double-click the previous song on the right ear function key.

9. Low battery alarm: when the power is tur non, a reminder tone will sound every 60 seconds when the battery is low;

10. Low battery shutdown: In the power-on state, the headset will automatically shut down when the battery is low

11. Charging

12. Put the earphone in the charging case to charge. The blue light is always on when charging, and the light is off when the charging is completed.

13. To charge the charging box, please connect the 5V (1A to 2A) adapter for charging.

14. Chinese and English switching: In TWS pairing status, double-click the “function” button for the second time and press it for 3 seconds to hear a prompt tone of “DI”. The switch is successful. After the mobile phone is successfully connected, the switch between Chinese and English cannot be performed.

15. Unilateral Bluetooth pairing steps:

16. When Bluetooth is paired for the first time, please keep the distance between the Bluetooth headset and mobile phone within 1 meter;

17. In the shutdown state, press and hold the “function” button of the headset for 5 seconds until the red light flashes alternately and then release

18. Turn on the Bluetooth function of the mobile phone, search for Bluetooth devices; select the “X13” headset; if paired After success, the indicator goes off; Note: If the pairing fails, please repeat the above operation;

19. Pairing steps:

20. When pairing the left and right ears of Bluetooth for the first time, please control the distance between the two Bluetooth headsets By 1 meter.

21. Remove the left and right Bluetooth headsets from the charging box at the same time, the indicator lights of the left and right headsets flash, automatic Pair the left and right ears. After the pairing is successful, a blue light flashes alternately.
    ( Note: The difference between the boot time of the two headphones cannot exceed 30 seconds)

22. Turn on the Bluetooth function of the mobile phone and search for Bluetooth devices; select the “X13” headset; if paired After success, the blue light goes out;

23. Siri: When the Bluetooth device is connected, press and hold the “function” key for 2 seconds to activate Siri on the phone. Via Bluetooth The headset talks with the phone.

Note: The secondary function must be supported by the mobile phone and the secondary function has been turned on.

Voice prompts

1. When the phone is turned on, the headset will automatically prompt power on”
2. When shutting down, the headset will automatically prompt “Shutdown”
3. When the pairing is successful, the headset will automatically prompt connected
4. When the connection is disconnected, the headset will automatically prompt “disconnected”
5. When the battery is low, the headset will automatically voice prompt “low battery”
6. When pairing the ear with the phone successfully, the main headset will automatically voice prompt “The second device is connected”

Remarks: The product is updated and updated from time to time, and some function operations will vary depending on the mobile phone Changes, please user based on the actual operation.

Precautions

• Please store and use this product in a normal temperature environment;
• Do not expose this product to rain or humidity;
• Do not throw, to avoid product damage caused by failing;
• Please do not disassemble, repair, and modify this product by yourself;
• Do not use chemical solvents to wipe this product
• Please don’t discard it at will, or at high temperature (temperature above 60 degrees) and fire, so as not to Cause danger
• Bluetooth products are affected by the environment and distance, please do not interfere near large electromagnetic fields And the radiation environment.
• If you do not use it for a long time, please charge it every 30 days to prevent the product from running out of electricity As a result, it cannot be turned on.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>