Eurofase 41960 Bastille 4 Light Black Pendant Instruction Manual
- June 13, 2024
- EUROfase
Table of Contents
Eurofase 41960 Bastille 4 Light Black Pendant
Product Information
- Product Model: 41960
- Maximum Wattage: 4x60W
- Bulb Type: MAX.TYPE B10
- Voltage: 120V
- Frequency: 60HZ
- Included Components: None (Bulb not included)
- Additional Components: Outdoor silicone caulking compound
Product Usage Instructions
- Ensure the power supply is turned off before installation.
- Identify the required components:
- A-Outlet Box screw x 2
- B-Black wire(L) from junction box
- C-White wire(N) from junction box
- D-Green wire/Bare copper (G) from junction box
- E-Smooth side wire (L) from fixture
- F-Ribbed side wire (N) from fixture
- G-Green wire/Bare copper from fixture
- H-Wire connector x 3
- Apply outdoor silicone caulking compound around the installation area to ensure weatherproofing.
- Securely attach the outlet box using the provided screws (A).
- Connect the wires as follows:
- Connect the black wire (B) from the junction box to the smooth side wire (E) from the fixture.
- Connect the white wire (C) from the junction box to the ribbed side wire (F) from the fixture.
- Connect the green wire/bare copper (D) from the junction box to the green wire/bare copper (G) from the fixture.
- Securely fasten the wire connections using the provided wire connectors (H).
- Double-check all connections to ensure they are properly secured.
- Install the appropriate bulb (MAX.TYPE B10, 120V, 60HZ) into the fixture. (Bulb not included)
- Turn on the power supply and test the fixture to ensure proper functionality.
Thank You
You’ ve just purchased a lighting product designed and built to provide you with years of enjoyment.
Instructions
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL certified wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Estimated Assembly Time: 20 minutes
Tools Required
Tools Required For Assembly (not included)
- Flathead screwdriver,
- Phillips screwdriver,
- Pliers,
- Electrical tape and Wire cutters.
Helpful Tools (not included)
- Wire strippers,
- Ladder
Installation Instructions
- 4×60W MAX.TYPE B10, 120V,60HZ
- (Bulb not included)
- A- Outlet Box screw x 2
- B- Black wire(L) from junction box
- C- White wire(N) from junction box
- D- Green wire/Bare copper (G) from junction box
- E- Smooth side wire (L) from fixture
- F- Ribbed side wire (N) from fixturer
- G- Green wire/Bare copper from fixture
- H- Wire connector × 3
Attention: Apply the Silicone gei(not included) around the fixture body where it comes into contact with the wall.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>