EUROfase 31784-016 LED Bathroom Vanity Light Instruction Manual
- June 13, 2024
- EUROfase
Table of Contents
EUROfase 31784-016 LED Bathroom Vanity Light
Thank You
You’ ve just purchased a lighting product designed and built to provide you
with years of enjoment.
Product Information
- Product Model: 31784-016
- Product Name: Lighting Product
- Description: This lighting product is designed and built to provide years of enjoyment.
Product Usage Instructions
- Save these instructions for future reference.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included):
- Flathead screwdriver
- Phillips screwdriver
- Pliers
- Electrical tape
- Wire cutters
- Helpful Tools (not included):
- Wire strippers
- Ladder
Follow the steps below for assembly:
- Attach A-Outlet Box screws (x2) to the junction box.
- Connect the Black wire (L) from the junction box to B-Black wire.
- Connect the White wire (N) from the junction box to C-White wire.
- Connect the Green wire/Bare copper (G) from the junction box to D-Green wire/Bare copper.
- Connect the Black wire (L) from the fixture to E-Black wire.
- Connect the White wire (N) from the fixture to F-White wire.
- Connect the Green wire/Bare copper from the fixture to G-Green wire/Bare copper.
- Use H-Wire connectors (x3) to secure the connections.
Note: Ensure all connections are properly secured and insulated using electrical tape if necessary.
INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE:
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together.
- If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Estimated Assembly Time: 20 minutes
Tools
Tools Required For Assembly (not included): Flathead screwdriver,
Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder
INSTALLATION
- A- Outlet Box screw x 2
- B- Black wire(L) from junction box
- C- White wire(N) from junction box
- D- Green wire/Bare copper (G) from junction box
- E- Black wire (L) from fixture
- F- White wire (N) from fixture
- G- Green wire/Bare copper from fixture
- H- Wire connector x 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>