EUROfase 38158 Grado 6 Light Round Pendant Instruction Manual
- June 13, 2024
- EUROfase
Table of Contents
EUROfase 38158 Grado 6 Light Round Pendant
Product Information
- Model Number: 39416
- Brand: BCD H
- Maximum Wattage: 6x60W (Bulb Type: B10)
- Power Input: 120V~, 60Hz
Product Usage Instructions
- Ensure that the outlet box is securely mounted and capable of supporting the weight of the fixture.
- Using the provided outlet box screws (A), attach the fixture to the outlet box.
- Identify the black wire (B) from the junction box and connect it to the black wire (L) from the fixture.
- Identify the white wire (C) from the junction box and connect it to the white wire (N) from the fixture.
- If available, identify the green wire or bare copper wire (D) from the junction box and connect it to the green wire or bare copper wire (G) from the fixture. Note: Some fixtures may not have this wire.
- Identify the smooth side wire (E) and ribbed side wire (F) from the fixture. Connect the smooth side wire (L) to the corresponding wire in your electrical system and connect the ribbed side wire (N) to the corresponding wire in your electrical system.
- If available, connect the green wire or bare copper wire (G) from the fixture to a ground wire in your electrical system.
- Secure all connections using the provided wire connectors (H). Ensure that all connections are tight and properly insulated.
- Install the appropriate bulbs (not included) into the fixture. Refer to the maximum wattage and bulb type specified in the product information.
Thank You
You’ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removina the fuse at the fuse boy • All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL certified wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included): Flathead screwdriver, Phillips
screwdriver, Pliers, Electrical tape and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder
PRODUCT IDENTIFICATION
- A-Outlet Box screw x 2
- B-Black wire(L) from junction box
- C-White wire(N) from junction box
- D-Green wire/Bare copper (G) from junction box
- E-Smooth side wire (L) from fixture
- F-Ribbed side wire (N) from fixturer
- G-Green wire/Bare copper from fixture
- H-Wire connector x 3
Read User Manual Online (PDF format)
Loading......