EURofase 38164 Series Pennino Black Chandelier Instruction Manual
- June 13, 2024
- EUROfase
Table of Contents
EURofase 38164 Series Pennino Black Chandelier
Product Information
- Product Model: 38164
- Maximum Wattage: 10x4W
- Bulb Type: T8 LED
- Power Input: 120V
- Frequency: 60Hz
- Dimmable Bulb included
- Luz bombilla regulable incluse (Dimmable bulb included)
Product Usage Instructions
- Start by turning off the power supply to the outlet box.
- Using the provided wire connectors (H), connect the following wires from the junction box to the fixture:
- B-Black wire (L) from the junction box
- C-White wire (N) from the junction box
- D-Green wire/Bare copper (G) from the junction box
- Next, connect the smooth side wire (L) from the fixture to the ribbed side wire (N) from the fixture using the wire connectors (H).
- Finally, connect the green wire/bare copper wire from the fixture to the green wire/bare copper wire from the junction box using the wire connector (H).
- Tighten all connections securely.
- Make sure the dimmable bulb is properly inserted into the fixture.
- Turn on the power supply to the outlet box.
- The T8 LED bulb should now be ready for use. Adjust the dimming level as desired using a compatible dimmer switch.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Follow the assembly Instructions by reading the numerIcal progression.
- Use a qualifled electriclan for Installation of this Ilghting fixture.
- Before Installing fixture, disconnect power by turning off the circult breaker ÈURofas LIGHTI or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included: Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder
10x4W MAX T8 LED BULB, 120V, 60Hz
(Dimmable Bulb included)
10 AMPOULE 4W MAX TYPE T8 À DEL,120 V, 60Hz
(Ampoule à intensité variable includa)
10 BOMBILLA TIPO T8 LED DE 4W MÁX. 120V, 60Hz
(Luz bombilla regulable incluse)
Parts List
- A-Outlet Box screw x 2
- B-Black wire(L) from junction box
- C-White wire(N) from junction box
- D-Green wire/Bare copper (G) from junction box
- E-Smooth side wire (L) from fixture
- F-Ribbed side wire (N) from fixturer
- G-Green wire/Bare copper from fixture
- H-Wire connector x 3
Read User Manual Online (PDF format)
Loading......