allen roth FSI 1331A DORB Kirby 36-in to 72-in Dark Oil-Rubbed Bronze Steel Single Curtain Rod Instruction Manual
- June 13, 2024
- Allen+Roth
Table of Contents
allen roth FSI 1331A DORB Kirby 36-in to 72-in Dark Oil-Rubbed Bronze
Steel Single Curtain Rod
Product Information
The ALLEN+ROTH Drapery Rod Set is a high-quality product designed for hanging curtains or drapes. It is a trademark of LF, LLC and is protected by copyright. The set includes all the necessary hardware for installation and comes with a detailed user manual.
- Estimated Assembly Time: 30 minutes
- Trademark: ALLEN+ROTH
- Manufacturer: LF, LLC
Product Usage Instructions
- Make sure to use a level (not included) during installation to ensure proper alignment.
- If necessary, use the provided screws and anchor plugs to secure the rod in place.
- Attach the curtain hooks to the rod, if applicable.
- Hang the rod on the brackets or holders, ensuring it is securely in place.
- Adjust the curtains or drapes as desired.
- If the rod has end caps, reattach them and tighten them to secure the curtains in place.
- For care and maintenance, periodically clean the rod and hardware using a soft cloth and mild detergent.
ALLEN+ROTH and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
Thank you for purchasing this allen + roth product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item number and refer to the
Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems,
please call our customer service department at
866-439-9800, 8 a.m. – 8 p.m., EST,
Monday – Sunday. You could also contact us at
partsplus@lowes.com.
Image is for example only. Appearance of actual product may vary.
TROUBLESHOOTING
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time : 30 minutes
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit lowes.com for more information
CARE AND MAINTENANCE
- Clean with a soft cloth.
- Do not use abrasive cleaning agents, solvents or polishes as they may damage the finish.
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
-
Using bracket as a guide, adjust to desired height and mark location on wall for mounting screws.
-
Remove bracket from wall. Drill pilot hole using 3/16 in. bit (not included) and insert wall anchors
NOTE
Anchors are not needed for all installation types. -
Attach bracket to wall using screws provided.
NOTE
Repeat steps 1 to 3 for additional brackets. Use level (not included) if necessarv.
-
Extend telescopic rod slightly. Remove finial from smaller diameter rod section.
-
Slide additional rod over smaller diameter rod
NOTE
At this point you should have a complete telescopic rod with 2 large diameter rods connected with 1 smaller diameter rod section in the middle. -
Add drapery (sold separately), extend rod to desired length and hang ready rod in brackets.
-
Extend telescopic rod slightly. Remove finial from smaller diameter rod section.
-
Reattach finial and tighten set screws on brackets to lock rod in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>