CASETiFY 232313FRE PowerThru Wireless Car Charger User Manual
- June 1, 2024
- CASETIFY
Table of Contents
CASETiFY 232313FRE PowerThru Wireless Car Charger
Product Information
Specifications
- Model No: [Model Number]
- Product Input: [Input Voltage]
- Output: [Output Voltage]
- Connector: USB-C
- Charging Distance: [Distance]
- Frequency Band: [Frequency]
- Working Temperature: [Range]
- Storage Temperature: [Range]
- Material: [Material Used]
- Size: [Dimensions]
- Weight: [Weight]
Product Overview
- Charging Panel
- Easy-to-Grip Edge
- Air Vent Mount (Metal Hook)
- Rotating Ball Mount
- USB-C Port
Product Usage Instructions
Instructions
- Step 1: Connect the power supply (Preferred with 9V power) via USB-C cable. *Power supply is not included.
- Step 2: Turn the control knob counterclockwise to adjust the length of the metal hook.
- Step 3: Attach the air vent mount by simply pushing the mount onto the blade of the vehicle’s air vent. Ensure the pins are well placed on the air vent blade.
- Step 4: Turn the control knob clockwise to lock the metal hook to the air vent until the charger is securely held on the air vent.
- Step 5: Place your phone against the mount to secure the magnets, and charging will start automatically.
FAQs
- Please read all instructions and warnings before using this product.
- Avoid improper use to prevent product damage, excess heat, toxic fumes, fire, or explosion.
- Avoid storing the device in high-temperature environments or close to heat sources.
- Do not expose the wireless car charger to humid environments like rain or snow.
- Avoid overloading outputs above the rating to prevent risks of fire or injury.
- Do not disassemble, modify, or replace any part of the product.
- If the product shows signs of excessive heat, emitting odor, deformities, abrasions, cuts, or abnormal behavior, stop use immediately and contact the manufacturer.
- The wireless charger will automatically switch off when disconnected from the power supply; switch off when not in use.
WARNING: Cancer & Reproductive Harm – www.P65Warnings.ca.gov
PACKAGE CONTENTS
- PowerThru™ Wireless
- Car Charger
- Charging Cable
- User Manual
PRODUCT OVERVIEW
- Charging Panel
- Easy-to-Grip Edge
- Air Vent Mount (Metal Hook)
- Rotating Ball Mount
- USB-C Port
INSTRUCTIONS
Step 1
- Connect the power supply (Preferred with 9V power) via USB-C cable.
- The power supply is not included
Step 2
- Turn the control knob counterclockwise to adjust the length of the metal hook.
Step 3
- Attach the air vent mount by simply pushing the mount onto the blade of the vehicle’s air vent. Please make sure the pins are well placed on the air vent blade.
Step 4
- Turn the control knob clockwise to lock the metal hook to the air vent until the charger is securely held on the air vent.
Step 5
- Place your phone against the mount to secure it to the magnets, and charging will start automatically.
SPECIFICATIONS
Model No CTF-T-ATE-232313FRE
Product CTF-T-ATE-232313FREBLK
Input 5V 3A/9V 2.22A
Output 5W/7.5W/10W/15W Max
Connector USB-C
Charging Distance ≤6mm
Frequency Band 110k Hz – 205k Hz
Working Temperature 0 – 40°C
Storage Temperature -10 – 60°C
Material ABS+Stainless Steel
Size 86 x 67 x 70 (mm)
Weight 130g
Compatibility
- This Wireless charging base is optimized to work with devices with Qi wireless charging technology.
- Magnetic Snap function compatible with iPhone 12 and later series.
- Air vent mount works best with vents that have horizontal slats.
Compatibility with various air vent
IMPORTANT SAFETY INSTRUCTIONS
- Please read all instructions and warnings before using this product.
- Improper use of this product may result in product damage, excess heat, toxic fumes, fire, or explosion, for which the purchaser and manufacturer are responsible.
- Do not store the device in a high-temperature environment, including heat sources and intense sunlight. Do not place the device close to fire or other excessively hot environments.
- Do not expose the wireless car charger to a humid environment, including rain or snow.
- Do not use the wireless car charger over its output rating.
- Overloading outputs above the rating may result in a risk of fire or injury to persons.
- Do not disassemble or modify this product.
- Do not attempt to power this device using any method other than the device’s USB-C connector.
- Do not attempt to replace any part of this product.
- All products have gone through a thorough quality assurance inspection.
- If your product is found excessively hot, is emitting odor, is deformed, abraded, cut, or is experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact the manufacturer.
- To comply with FCC RF exposure compliance requirements, the wireless charging stand must be used with a separation distance of at least 20 cm from all persons.
- Purchaser agrees to defend, indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse by a minor.
- The wireless charger will automatically switch off when disconnected from the power supply, and switch off the wireless charging stand when not in use.
- This product is intended exclusively for use in motor vehicles.
- WARNING: Cancer & Reproductive Harm www.P65Warnings.ca.gov
- IC：26753-232313FR
- FCCID:2ASRV-232313FRE
FCC
NOTE
This device complies with part 15 of the FCC Rules and contains license-exempt transmitter(s)/receiver(s) that comply with that to which the receiver is connected Innovation, Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The distance between the user and the products should be no less than 20cm. This device has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different for help.
- Consult the dealer or an experienced radio/TV technician
ISED STATEMENT
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference,
This device complies with ISED RF radiation exposure limits set forth for an
uncontrolled environment. This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.