allen roth FSI 6802B BNIC 72-in to 144-in Brushed Nickel Steel Single Curtain Rod Instruction Manual
- June 13, 2024
- Allen+Roth
Table of Contents
FSI 6802B BNIC 72-in to 144-in Brushed Nickel Steel Single Curtain Rod
Product Information
Product Name: Drapery Rod Set Trademark: ALLEN+ROTH Trademark Design: Logo Trademark Owner: LF, Local rights reserved.
DRAPERY ROD SETENSEMBLE DE TRINGLES À RIDEAUX JUEGO DE VARILLAS PARA CORTINA
Thank you for purchasing this Allen + rots product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 866-439-9800, 8 a.m. – 8 p.m., EST, Monday – Sunday. You could also contact us at partsplus@lowes.com.
PREPARATION
TOOLS REQUIRED (NOT INCLUDED)
FEELING CONFIDENT? START YOUR NEXT PROJECT
PACKAGE CONTENTS
HARDWARE CONTENTS
INSTALLATION OVERVIEW
Using bracket as a guide, adjust to desired height landmark location on
wall for mounting screws.
Remove bracket from wall. Drill pilot hole using 3/16 in bit.
NOTE
Anchors are not needed for all installation types.
INSTALLATION OVERVIEW/VUE D’ENSEMBLE DE L’INSTALLATION/DESCRIPCIÓN GENERAL DE
LA INSTALACIÓN
Attach bracket to wall using screws provided.
Extend telescopic rod slightly.
Slide additional rod over smaller diameter rod.
NOTE/REMARQUE/NOTA
At this point you should have a complete telescopic rod with 2 large diameter
rods connected with 1 smaller diameter rod section in the middle.
Reattach final and tighten set screws on brackets to lock rod in place.
