SATCO 60-6115 Hopkins Outdoor Collection 18.5 inch Large Post Light Instruction Manual
- June 13, 2024
- SATCO
Table of Contents
SATCO 60-6115 Hopkins Outdoor Collection 18.5 inch Large Post Light
Product Information
SKU: 60/6115
This product is an outdoor fixture that requires installation by a qualified
electrician. It is designed to provide lighting and can accommodate a bulb of
your choice (not included). The fixture body is made of durable materials and
includes glasses for protection. The power supply wires need to be connected
properly and the fixture should be secured to a post using the provided wood
screws. The installation should be done with caution, and the power must be
disconnected before starting the process.
Product Usage Instructions
- Before starting the installation, consult a qualified electrician if you are unsure about the process.
- Disconnect the power by either turning off the circuit breaker or removing the fuse at the fuse box.
- Pull the power supply wires out from the post and the fixture wires out from the fixture body.
- Connect the wires tightly by matching black to black and white to white. Use a wire connector to cover the connection.
- Attach the power supply ground wire to the fixture ground wire.
- Secure the fixture body to the post using the provided wood screws.
- Install a bulb of your choice (not included) into the fixture.
- Place the glasses onto the fixture body and attach them securely.
- Using a head screw, screw the top cover onto the fixture body.
- Turn on the power.
Please ensure that you follow these instructions carefully to ensure proper installation and safe usage of the product.
NOTE: Please consult a qualified electrician if you are not certain of the installation.
CAUTION
Before starting the installation, disconnect the power by turning off the circuit breaker or removing the fuse at the fuse box.
- Pull the power supply wires out from the post and the fixture wires out from the fixture body, and attach the wires tighter by connecting black to black and white to white.
- Cover connection using a wire connector. Attached is the power supply ground wire to the fixture ground wire.
- Secure the fixture body to the post using the wood screws provided.
- Install the bulb (No included).
- Place the glasses and attach them to the fixture body. Using the head screw screw the top cover ontofixturebody.
- Turn on the power.