DIGITUS DS-30222 PCI Express Card Extender Installation Guide
- June 13, 2024
- DIGITUS
Table of Contents
DIGITUS DS-30222 PCI Express Card Extender
Introduction
The Digitus PCI Express Card extends the PC by 2x USB-C™ and 3x USB A ports.
Various devices can be connected to this card, such as hard disks, DVD drives,
mouse, keyboard, card reader and more.
Main Features
- USB 3.1 PCI Express Interface Card with 5 external USB 3.1 ports: 3x USB A jack, 2x USB-C jack for devices of the latest generation
- 2x USB-C™ (USB 3.1) up to 10 Gbps
- 3x USB-A (USB 3.1) up to 10 Gbps
- Supports data transfer rates of 10G / 5G / 480M / 12M / 1.5Mbps
- Power supply: USB-C™ 5V/3.5A per port max.
- Power supply: USB A 5V/1A per port max.
- Plug and Play – no driver installation required
Package Contents
- 1x USB-3.1 Gen2 PCI Express Card
- 1x Driver CD
- 1x User manual
Product Specification
Technical
Transfer rate| Each port supports a transfer rate of up to 10 Gbps (USB3.1 Gen2),
Supports data transfer rates of
10G / 5G / 480 / 12 / 1.5 Mbps
Output| USB Type-C™ Port 5 V / 3.5 A,
USB Type A Port 5 V / 1 A
SuperSpeed| USB 3.1 Super Speed up to 10 Gbps,
2x SuperSpeed USB 10 Gbps (USB 3.1 Gen2) USB Type-C™
jack,
3x SuperSpeed USB 10 Gbps
(USB 3.0) A jack
Supporting| Support of 4-way PCI Express v2.0,
Supports eXtensible Host Controller Interface (xHCI) Specification 1.1,
Supports Multiple INs
Operating systems| Supports Windows 7/8/8.1/10/11,
Linux
USB A ports| 3
USB C™ ports| 2
Hardware Installation
- Turn Off the power to your computer.
- Unplug the power cord and remove your computer’s cover.
- Remove the slot bracket from an available PCIe x4/x8/X16 slot.
- To install the card, carefully align the card’s bus connector with the selected PCIe slot on the motherboard. Push the board down firmly.
- Replace the slot bracket’s holding screw to secure the card.
- Replace the computer cover and reconnect the power cord.
For Windows 7 (32 or 64 bit):
-
Please insert the CD driver bound with USB-3.1 PCI Express Card into your CD-ROM Drive.
-
At the Windows desktop, click “Computer” Double click CD-ROM Drive to Brower driver’s files:
Type: D: \ USB3.1 ASM1142 \Setup.exe, click OK.
(Change D: to match your CD-ROM drive letter) -
Follow the on-screen instruction to complete the installation
For Windows 8, 8.1, Server 2012 and Windows 10/11 (32 or 64 bit):
Using in Windows box driver for Win8, Win8.1 and Win10/11 to complete install
the drivers.
To Verify Windows® Driver Installation
Click on the Device Manager tab in System Properties, which you access from
the Windows Control Panel. If you have installed successfully, you should see
“ASMedia USB3.1eXtensible Host controller” …installed under Universal Serial
Bus Controllers item.
Hereby ASSMANN Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH Auf dem Schüffel 3 58513 Lüdenscheid Germany
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>