Yosoo X6 Bone Conduction Bluetooth Headphone Instruction Manual
- June 12, 2024
- Yosoo
Table of Contents
**Yosoo X6 Bone Conduction Bluetooth Headphone Instruction Manual
**
Product Overview
- Indicator light
- Magnetic suction charging port
- Volume “-” button
- On/off button
- Volume “+” button
- Microphone
Charge
The headphone uses a built-in rechargeable battery , the first use of the headphone must be fully charged to the battery .In use , if the voice promps “low battery”, the battery is low, and you need to charge the headphone.
The charging cable should be connected to the headphone magnetic charging port , about 2 hours to be fully charged. The charging status indicator’s red light is always on, full charge is always on the blue light.
Note : Magnetic charging has a positive and negative polarity correspondence, mutual adsorption can be charged normally, and mutual repulsion will not charge or even cause a short circuit.
Warning : The rechargeable battery of this product must be disposed of properly for recycling. Please do not put the battery into the fire ,so as not to cause an explosion .
Operating instruction
| Function | Operation | Indicator |
|---|---|---|
| On | Press and hold ④(around 3-5 seconds ) | Light on |
| Off | Press and hold ④(around 3-5 seconds ) | Light off |
Music Play
| Function | Headphone status | Operation |
|---|---|---|
| Answer the call | Incoming call | Short press the power button to answer |
| Decline the call | Incoming call | Long press the power button for 1 second to |
hang up
volume control| During call| click “+” / “-“
Phone/Bluetooth headset switch| During call| Long press and hold the power on
button for 1 second
Answer the phone
| Function | Headphone status | Operation |
|---|---|---|
| Answer the call | Incoming call | Short press the power button to answer |
| Decline the call | Incoming call | Long press the power button for 1 second to |
hang up
volume control| During call| click “+” / “-“
Phone/Bluetooth headset switch| During call| Long press and hold the power on
button for 1 second
Operating instruction
How to pair with Bluetooth
Bluetooth pairing:In the off state, press and hold the power button for 3 to 5 seconds, the light into the red and blue flashing state, and then enter the pairing state. Turn on the Bluetooth (cell phone/computer) on the device and search for he device name ” X6 “, click the device” X6 “to pair and connect.
Bluetooth / MP3 mode switching:Double click the power button (multi-
function composite button) to freely switch between Bluetooth and memory mode.
Emphasis: The power on automatically default Bluetooth mode status.
Song download: Connect the original charging data cable to the computer and headset to read Take a USB flash drive and copy the computer song to the USB flash drive
TF card playback mode switch: In TF card mode (when playing songs), double tap the power button for the first timeto switch to sequential playback mode/triple tap the power button to switch to random playback mode (with memory function)
Warm tip: Bluetooth headphone will automatically search for the latest device to connect after powering on. When the Bluetooth headphone and the device deviate from the effective distance of 10 meters (33 feet), the Bluetooth headphone will be disconnected from the device, and they will be reconnected only when they are placed within 10 meters again, if theBluetooth headphone is disconnected from the device for too long, then you need to click the multi-function button on the Bluetooth headphone to reconnect.
AI intelligent voice control
(Phone needs to support voice wake-up function)
| Function | headphone status | Operation |
|---|---|---|
| Voice control | Bluetooth is connected | Press and hold the On/Off button fro 1 |
second
Description: In the Bluetooth connection state,long press the power on button for 1 second to wake up, after hearing the tone you can voice manipulate the phone, save the time to operate the phone, fast and intelligent.
Indicator
| Charging | Red linght(always on) |
|---|---|
| Charging completed | Blue light (always on) |
| Search for pairing | Flash in red and blue alternately |
| Bluetooth music playback | Blue light flashes slowly for 5 seconds |
Product parameter
- Charging time: About 2 hours
- Distance: Bluetooth 10 meter
- Battery: 230mAh
- Play: More than 5 hours@70% volume
- Agreement: a2dp1.3.2\avctp1.4\avdtp 1.3\ avrcp 1.6.2\hfp 1.8 \spp 1.2\rfcomm 1.1\pnp 1.3\hid1.1.1\ sdpcore5.3\l2cap core 5.3
- Music format support: WAV,FLAC,WMA,AAC,MP3, APE, M4A
- Version: 5.3
- Input: 5V/180mA
Maintenance and cleaning
- The headphone can not soak seawater/salt water for a long time, they use fresh water to rinse and dry. Charging electromagnetic suction part is easy to corrode.
- If not used for a long time, please at least once a month full charge.
- Please do not disassemble any parts of the product, such as the discovery of product defects immediately stop using the product, and contact the seller after-sales service.
- After each campaign, please wipe the surface of the headphone water, especially the location of the filling electromagnetic suction, to deal with the cleaning in time to prevent sweat, and salt water corrosion charging port, affecting the life of the product.
- Keep the product away from fire ,heat,freezing sources, chemicals, violent impact disassembly and extrusion products are strictly prohibited .
- Please use a charging head with an output of 5V1A or less .
Product warranty card
This card is a product warranty certificate, please keep it properly
Product maintenance records
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
