EUROfase 39464 Barletta 10 Light LED Chandelier Instruction Manual

EUROfase 39464 Barletta 10 Light LED Chandelier

Product Information

• A-Outlet Box screw x 2
• B-Black wire(L) from junction box
• C-White wire(N) from junction box
• D-Green wire/Bare copper (G) from junction box
• E-Black wire (L) from fixture
• F-White wire (N) from fixture
• G-Green wire/Bare copper from fixture
• H-Wire connector x 3

The product includes two outlet box screws (A), which are used to secure the product to the outlet box. The black wire (B) should be connected to the black wire in the junction box, while the white wire (C) should be connected to the white wire in the junction box. The green wire or bare copper wire (D) from the junction box should be connected to the corresponding green wire or bare copper wire from the fixture (G). The black wire (E) from the fixture should be connected to the black wire in the junction box, and the white wire (F) from the fixture should be connected to the white wire in the junction box. The green wire or bare copper wire from the fixture (G) should also be connected to the corresponding green wire or bare copper wire from the junction box. The product also includes three wire connectors (H), which are used to securely connect wires together.

Product Usage Instructions

1. Start by turning off the power supply to the junction box.
2. Attach the product to the outlet box using the two outlet box screws (A).
3. Connect the black wire (B) from the junction box to the black wire (E) from the fixture using a wire connector (H).
4. Connect the white wire (C) from the junction box to the white wire (F) from the fixture using a wire connector (H).
5. Connect the green wire or bare copper wire (D) from the junction box to the corresponding green wire or bare copper wire (G) from the fixture using a wire connector (H).
6. Ensure all connections are securely fastened and properly insulated.
7. Turn on the power supply and test the functionality of the product.

Note: If you are unsure about any step or have any doubts, it is recommended to consult a professional electrician for assistance.

INSTRUCTIONS

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

• Follow the assembly instructions by reading the numerical order.
• Use a qualified electrician for installation of this lighting fixture.
• Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
• All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
• Use CSA or UL certified wire connectors suitable for the gauge, type and number of conductors.
• Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
  • Estimated Assembly Time: 20 minutes
  • Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters. Helpful Tools (not included: Wire strippers, Ladder

INSTALLATION

Note: Press the wire restraint to adjust the desired length of cable.

• A- Outlet Box screw x 2
• B- Black wire(L) from junction box
• C- White wire(N) from junction box
• D- Green wire/Bare copper (G) from junction box
• E- Black wire (L) from fixture
• F- White wire (N) from fixture
• G- Green wire/Bare copper from fixture
• H- Wire connector x 3

THIS LUMINAIRE MUST BE MOUNTED OR SUPPORTED INDEPENDENTLY OF AN OUTLET BOX

DIMENSION

• 57W MAX 120V, 60 Hz (Dimmable LED Included)

Thank You: You’ve just purchased a lighting product designed and built to provide you with years of enjoyment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>