EUROfase 39408 Grafice Large LED Flush Mount Ceiling Light Instruction Manual
- June 12, 2024
- EUROfase
Table of Contents
EUROfase 39408 Grafice Large LED Flush Mount Ceiling Light
Product Information
You have purchased a lighting product that is designed and built to provide you with years of enjoyment. The product comes with the following components:
| Component | Description |
|---|---|
| A | Outlet Box screw (x2) |
| B | Black wire (L) from junction box |
| C | White wire (N) from junction box |
| D | Green wire/Bare copper (G) from junction box |
| E | Black wire (L) from fixture |
| F | White wire (N) from fixture |
| G | Green wire/Bare copper from fixture |
| H | Wire connector (x3) |
Product Usage Instructions
To assemble the product, please follow these steps:
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder
Identify the components:
- A – Outlet Box screw (x2)
- B – Black wire (L) from junction box
- C – White wire (N) from junction box
- D – Green wire/Bare copper (G) from junction box
- E – Black wire (L) from fixture
- F – White wire (N) from fixture
- G – Green wire/Bare copper from fixture
- H – Wire connector (x3)
Use the provided tools to connect the wires according to the following instructions:
| Component | Connection |
|---|---|
| B | Connect to E |
| C | Connect to F |
| D | Connect to G |
| H | Use the wire connectors to connect B, C, and D together. |
Note: Ensure proper insulation and secure connections when connecting the wires.
Attach the product to the outlet box using the provided screws (A).
Follow the additional instructions in the user manual for further setup and
operation of the lighting product.
For any future reference, please save these instructions.
Thank You
You’ ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL certified wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
- Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included):
- Flathead screwdriver
- Phillips screwdriver
- Pliers
- Electrical tape
- Wire cutters.
Helpful Tools (not included):
- Wire strippers
- Ladder
DESCRIPTION
1 X 30W MAX, LED, 120V~, 60Hz (Dimmable LED Included)
- A- Outlet Box screw x 2
- B- Black wire(L) from junction box
- C- White wire(N) from junction box
- D- Green wire/Bare copper (G) from junction box
- E- Black wire (L) from fixture
- F- White wire (N) from fixture
- G- Green wire/Bare copper from fixture
- H- Wire connector x 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>