EURofase Tura 1 Light Black Mini Pendant with Black Gold Shade Instructions

EURofase Tura 1 Light Black Mini Pendant with Black Gold Shade

Product Information

You have purchased a lighting product that is designed to provide you with years of enjoyment. This product requires assembly and comes with the following specifications:

• Model Number: 38147
• Maximum Bulb Wattage: 60W
• Bulb Type: A19
• Power Supply: 120V, 60Hz

Please note that the bulb is not included with the product.

Product Usage Instructions

Please follow the steps below to assemble and install your lighting product:

1. Estimated Assembly Time: 20 minutes
2. Tools Required For Assembly (not included):
   • Flathead screwdriver
   • Phillips screwdriver
   • Pliers
   • Electrical tape
   • Wire cutters
3. Helpful Tools (not included): Wire strippers, Ladder
4. Locate the outlet box where you want to install the lighting product.
5. Securely attach the lighting product to the outlet box using the provided screws (A).
6. Connect the wires as follows:
   • B- Black wire (L) from junction box
   • C- White wire (N) from junction box
   • D- Green wire/Bare copper (G) from junction box
   • E- Black wire (L) from fixture
   • F- White wire (N) from fixture
   • G- Green wire/Bare copper from fixture
7. Securely connect the wires using the wire connectors provided (H).
8. Once the wires are connected, carefully install the bulb (not included) according to the bulb’s instructions.
9. After ensuring all connections are secure, turn on the power supply and test the lighting product.

Please refer to these instructions for future reference.

INSTALLATION INSTRUCTIONS

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

• Follow the assembly instructions by reading the numerical progression.
• Use a qualified electrician for installation of this lighting fixture.
• Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
• All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
• Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
• Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
  • Estimated Assembly Time: 20 minutes
  • Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
  • Helpful Tools (not included): Wire strippers, Ladder
• A- Outlet Box screw x 2
• B- Black wire(L) from junction box
• C- White wire(N) from junction box
• D- Green wire/Bare copper (G) from junction box
• E- Black wire (L) from fixture
• F- White wire (N) from fixture
• G- Green wire/Bare copper from fixture
• H- Wire connector x 3

Thank You: You’ ve just purchased a lighting product designed and built to provide you with years of enjoyment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>