EUROfase 38867 Ricca 6 Light Oval Chandelier Instruction Manual

EUROfase 38867 Ricca 6 Light Oval Chandelier

Product Information

You have purchased a lighting product that is designed and built to provide you with years of enjoyment. This product requires assembly and comes with the following specifications:

• Model Number: 38867
• Number of Pieces: 72
• Maximum Wattage: 6x60W
• Bulb Type: B10
• Voltage: 120V~
• Frequency: 60Hz
• Bulbs not included

Product Usage Instructions

Follow the below steps to assemble and install your lighting product:

1. Estimated Assembly Time: 20 minutes
2. Tools Required For Assembly (not included):
   • Flathead screwdriver
   • Phillips screwdriver
   • Pliers
   • Electrical tape
   • Wire cutters
3. Helpful Tools (not included):
   • Wire strippers
   • Ladder
4. Identify the following components:
   • A-Outlet Box screw x 2
   • B-Black wire(L) from junction box
   • C-White wire(N) from junction box
   • D-Green wire/Bare copper (G) from junction box
   • E-Black wire (L) from fixture
   • F-White wire (N) from fixture
   • G-Green wire/Bare copper from fixture
   • H-Wire connector x 3
5. Connect the wires as follows:
   • Connect the Black wire (L) from the junction box (B) to the Black wire (L) from the fixture (E) using one Wire connector (H).
   • Connect the White wire (N) from the junction box (C) to the White wire (N) from the fixture (F) using another Wire connector (H).
   • Connect the Green wire/Bare copper (G) from the junction box (D) to the Green wire/Bare copper from the fixture (G) using the remaining Wire connector (H).
6. Secure the lighting fixture to the outlet box using the provided Outlet Box screws (A).
7. Install the bulbs (not included) into the fixture according to the recommended bulb type (B10).
8. Turn on the power supply and enjoy your new lighting product.

Please note that if you encounter any difficulties during assembly or installation, refer back to these instructions or consult a professional for assistance.
Thank you for choosing our product. We hope you enjoy using it!

Thank You
You’ ve just purchased a lighting product designed and built to provide you with years of enjoyment

INSTRUCTIONS

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

• Follow the assembly instructions by reading the numerical order.
• Use a qualified electrician for installation of this lighting fixture.
• Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
• All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
• Use CSA or UL certified wire connectors suitable for the gauge, type and number of conductors.
• Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
• Estimated Assembly Time: 20 minutes
• Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
• Helpful Tools (not included): Wire strippers, Ladder

DESCRIPTION

6x60W MAX, B10, 120V~, 60Hz (Bulbs not included)

• A- Outlet Box screw x 2
• B- Black wire(L) from junction box
• C- White wire(N) from junction box
• D- Green wire/Bare copper (G) from junction box
• E- Black wire (L) from fixture
• F- White wire (N) from fixture
• G- Green wire/Bare copper from fixture
• H- Wire connector x 3

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>