EUROfase 39409 Grafice LED Oval Flush Mount Instruction Manual
- June 12, 2024
- EUROfase
Table of Contents
EUROfase 39409 Grafice LED Oval Flush Mount
Product Information
You have purchased a lighting product that is designed and built to provide you with years of enjoyment. This product requires assembly and comes with the following components:
- A-Outlet Box screw x 2
- B-Black wire(L) from junction box
- C-White wire(N) from junction box
- D-Green wire/Bare copper (G) from junction box
- E-Black wire (L) from fixture
- F-White wire (N) from fixture
- G-Green wire/Bare copper from fixture
- H-Wire connector x 3
Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included):
- Flathead screwdriver
- Phillips screwdriver
- Pliers
- Electrical tape
- Wire cutters
Helpful Tools (not included): Wire strippers, Ladder
Product Usage Instructions
- Before starting the assembly, make sure you have all the required tools mentioned above.
- Identify the outlet box screw (A) and attach it securely to the outlet box using a screwdriver.
- Locate the black wire (B) and white wire (C) coming from the junction box. Connect the black wire (B) to the black wire (E) from the fixture using a wire connector (H).
- Connect the white wire (C) to the white wire (F) from the fixture using another wire connector (H).
- If there is a green wire or bare copper wire (D) coming from the junction box, connect it to the green wire (G) from the fixture using a wire connector (H).
- Make sure all the connections are securely tightened.
- Use electrical tape to insulate the wire connectors and ensure no exposed wires are visible.
- Follow any additional instructions provided in the user manual for mounting or installing the lighting product.
- Once the assembly and installation are complete, refer to the user manual for information on operating and maintaining the lighting product.
Thank You
You’ ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL certified wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder
- 1 X 40W MAX, LED, 120V~, 60Hz (Dimmable LED Included)
- A -Outlet Box screw x 2
- B -Black wire(L) from junction box
- C -White wire(N) from junction box
- D -Green wire/Bare copper (G) from junction box
- E -Black wire (L) from fixture
- F -White wire (N) from fixture
- G -Green wire/Bare copper from fixture
- H -Wire connector x 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>