GROWATT 200W Solar Panel User Manual

June 12, 2024
Growatt

GROWATT 200W Solar Panel User Manual
GROWATT 200W Solar Panel

In the Box

  • Protective Case
    In the Box

  • Solar Panel

  • User Manual and Warranty Card

  • MC4 Output
    In the Box

How it Works

When using this product, make sure that the front of the panels facing the sun.

100W Solar Panel
How it Works

200W Solar Panel
How it Works

Step1
Unfold and flatten the solar panel
How it Works

Step2
Pull out the stand from the back of the panel and place it on the ground. Adjust the panel to make sure the front of the panel can receive sunlight directly.
How it Works

Step3
Connect the solar panel to the portable power station with an MC4 to XT60 cable to recharge.
How it Works

How it works

Your solar harvestis strongly correlated to the light intensity and itis maximized when sunlight and your panels form a right angle. By adjusting the opening angle of the stand, you can maximize your solar harvest and improve your solar charging efficiency. While charging your devices, avoid shadows on the panel which may resultin efficiency reduction

The angle between the panel and the ground is adjustable from 45° to 80°.
How it works

The sun’s rays should be kept perpendicular to the panel surface for the best performance. A ±10° difference from this 90° right angle will only marginally affect your harvest, but will still yield an optimal amount of solar energy.
How it works

Things to Remember When Using Your Solar Panel

  1. As the efficiency of solar panels depends upon lightintensity and the tilt angle used, the charging power of the panel may be affected by anumber of factors such as weather conditions, seasonal changes and locations. The installation and connection of this product should be carried out strictly in accordance with the instructions found in the User Manual.
  2. Only the main body of this product is waterproof. The junction box and connectors should not be immersed in water.
  3. This product must not come into contact with highly corrosive substances, or be immersed in corrosive liquids.
  4. 7o avoid damaging the product, do not use sharp objects on the surface of the panel, and do not knock or hit the product. z.0 not apply pressure to the panel or allow the panel to be dropped on any of ts corners, sides or faces. Such actions may resultin damage to the solar panel.
  5. The panel must not be knocked, exposed to heavy pressure, or bent during transportor in use. We recommend that the panelis keptin a vertical position when being moved or stored.
  6. When storing the panel, always ensure that the connectors of the junction box are not exposed to sunlight.
  7. To avoid injury, this product and its junction box must only be opened or disassembled by qualified personnel,
  8. Unwanted solar panels must be disposed of in accordance with the local regulations and requirements.

What Not to Do

Drop on the ground
What Not to Do
Bend the solar panel
What Not to Do
Strike with sharp or heavy objects
What Not to Do

Tech Specifications

100W Solar Panel 200W Solar Panel
Rated Power:100W(+/-5) Rated Power:200W(+/-10W)
Open Gircuit Voltage: 24V(Vimp 22.8V) Open Circut Voltage: 24V(Vmp 22.8V)
Short Circuit Current: 5.2 (imp 4.97A) ‘Short Ciruit Current: 10.464 (Imp

9.93A)
Output Gircuit Voltage: 21.16V(Vmp 19.16V)| Output Grcuit Voltage: 21.16V(Vmp 19.15)
Output Crcult Current: 4.96A(Imp 4.71A)| Output Circuit Current: 9.92A(Imp 9.424)
CellType: Monoerystaline Silcon| GellType: Monacrystaline Silcon
Interface Type: MC4| Intorface Type: MC4
General
Total Wolght: Approx. 3.6k (7.931bs)| Total Wolght: Approx. 7.0kg (15.416s)
Unfolded Dimensions: 1170°540°25 – 5mm (46212’1.0:0.2i)| Unfolded Dimensions: 2270°540°25 + Smm (62°21.2°1.0+0.2in)
Folded Dimensions: 603’540°25 – 5mm (23.7°21.2’1.0+ 0.2in)| Folded Dimensions: 60354025 – Smm (23.7°21.21.0+0.2in)
Warranty Period: 12 Months| Warranty Period: 12 Months

Testing and Certification

Symbols

*Standard Test Conditions: 1000W/m’(s2.OWIIE) AM1.5, 25°C (77°F)

Q&A

Does the 100W/200W Solar Panel generate a full 100W/200W of power?

The nominal power output figures are laboratory results undertest conditions. In most cases, itis normal for a solar panel not to deliver its full nominal power. Some of the reasons why this happens, as well as suggestions for getting closer to the nominal power figure, are given below:

  1. Light Intensity. The amount of light shining on the panel willresult in fluctuations in the power output. You are more likely toachieve the nominal power output figures when using the product on a clear day during the midday sun than when using the productin the morning or ater in the afternoon. Weather conditions will also affect the amount of sunlight that shines on the panel, which means that you are much less likely to achieve the nominal power figures in hazy, cloudy, or rainy conditions. Surface Temperature. The temperature of the solar panel surface will also affect the amountf power generated. The lower the surface temperature of the panel, the more power will be produced. For example, solar panels generate more power when used during the winter than during the summer. Solar panels generally reach temperatures close to 60° C (140″ F) during summer. This reduces nominal power by 13%, despite the higher levels of light shining on the panel
  2. Sunlight Angle. In optimal light conditions, the sun’s rays should remain perpendicular to the surface of the panel for best performance. Power output is only marginally impacted by sunlight hitting the panel within 10° on either side of this 90 angle.
  3. Panel Shading. The surface of the solar panel should not be shaded during use. Shading caused by shadows, foreign objects and glass can all greatly reduce power output.
  4. Performance Issues Caused by Malfunctioning Panels. If the panel stillisn’ tgenerating power or its output remains far below expected nominal power figures after addressing the issues above, there may be an issue with the panel tself.

Please contact Growatt Customer Support for assistance.

How much power can the 100W/200W Solar Panel generate under normal conditions?

‘This depends first and foremost on weather conditions. Generally speaking, on a clear day with no clouds in the sky, sunlight hitting the panel ata 90° angle usually generates 80%-90% of power in the 100W/200W panel. (Current light conditions are normally 800W-900W/m? (74.3W-83.6WIfE) with a panel temperature of 50°C (122°F) under test conditions. Nominal power ratings are based on 1000W/m? (92.9W/ft) in AM1.5 conditions with a panel temperature of 25°C (77°F) under test conditions. Power output figures close nominal values were normally observed in the midday sun during the winter.)

What should | know about the operating temperature, storage and use of the 100W/200W Solar Panel 7

The operating temperature of the Solar Panel is -20°C-85°C (-4°F-185°F). The panel should be folded and stored inits protective case. To extend the lifespan of the panel, ensure that the productis not exposed to external forces/impacts when notin use. The solar panel tselfis made of glass and must not be dropped, pierced, bent, or sat on. These actions may break the glass and render the panel unusable. Any such damage will not be covered by the free warranty.

Canluse non-Growatt branded power stations ith the 100W/200W Solar Panel ?

Yes, but only certain types. The power station used must be compatible with MC4 standards in order to work properly. In addition, other brands of power station may not offer the same levels of compatibility as Growatt’s portable power stations, may have lower nominal power ratings, and may not offer the same levels of performance.

Canl connect both 100W and 200W Solar Panel Panels together series?

Yes, butthis is not recommended. While the voltages of the two panels are identical, the currentratings are not. This means that when the panels are connected in series, the current will be limited to that of the 100 panel and the fullperformance potential of the 200W panel cannot be released, resulting in a 1+2<3 scenario. Please purchase panels of the same size if Youintend to connect multiple panels n series.

Can | connect Solar Panel in parallel?

We can connect 100W photovoltaic panels in parallel (only two) to make the current reach a maximum of 12A, but the effect of 200W photovoltaic panels in parallel is limited, because the maximum charging current of the infinity 1500 solar energy is 12A, which will lead to 1+ scenario where the connected device limits the current to 12A. We do not recommend paralleling 200W PV panels unless you are using a different brand of power station with an input current of 20A or more.

CONTACTUS
WWW.growattportable.con

GROWATT Logo

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals