EUROfase 35656 Cambridge 4 Light Bath Bar Instruction Manual

: June 12, 2024
: EUROfase

Table of Contents

EUROfase 35656 Cambridge 4 Light Bath Bar
Product Information
Product Usage Instructions
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

EUROfase 35656 Cambridge 4 Light Bath Bar

Product Information

You have just purchased a lighting product designed and built to provide you with years of enjoyment. This product is designed to be installed on an outlet box and requires the following tools for assembly:

Flathead screwdriver
Phillips screwdriver
Pliers
Electrical tape
Wire cutters

Additional helpful tools for assembly, though not included, are:

Wire strippers
Ladder

Please save these instructions for future reference.

Product Usage Instructions

Make sure you have all the necessary tools mentioned above before starting the assembly.
Identify the following components:
- A-Outlet Box screw x 2
- B-Black wire (L) from junction box
- C-White wire (N) from junction box
- D-Green wire/Bare copper (G) from junction box
- E-Black wire (L) from fixture
- F-White wire (N) from fixture
- G-Green wire/Bare copper from fixture
- H-Wire connector x 3
Using the flathead screwdriver and Phillips screwdriver, attach the outlet box screws (A) to secure the outlet box to the desired location.
Connect the black wire (B) from the junction box to the black wire (E) from the fixture using one of the wire connectors (H).
Connect the white wire (C) from the junction box to the white wire (F) from the fixture using another wire connector (H).
Connect the green wire/bare copper (D) from the junction box to the green wire/bare copper (G) from the fixture using the remaining wire connector (H).
Use pliers to secure all wire connectors (H) tightly.
Use electrical tape to wrap around each wire connector (H) for added safety.
Ensure all connections are secure and insulated.
Follow any additional instructions provided in the main product manual for turning on and operating the lighting product.

If you have any questions or need further assistance, please refer to these instructions or contact our customer support.

Thank You
You’ ve just purchased a lighting product designed and built to provide you with years of enjoment.

SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE

Follow the assembly instructions by reading the numerical progression.
Use a qualified electrician for installation of this lighting fixture.
Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder