EUROfase 42717 Brama Outdoor LED Wall Sconce Instruction Manual
- June 12, 2024
- EUROfase
Table of Contents
EUROfase 42717 Brama Outdoor LED Wall Sconce
PRODUCT INFORMATION
MODEL NO. 42717 Brama Outdoor LED Wall
Thank You
You’ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical order.
- Use a qualified electrician for the installation of this lighting fixture.
- Before installing the fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be by local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL-certified wire connectors suitable for the gauge, type, and number of conductors.
- Attach the junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If the junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Estimated Assembly Time : 20 minutes
Tools Required For Assembly (not included):
- Flathead screwdriver,
- Phillips screwdriver,
- Pliers,
- Electrical tape and
- Wire cutters.
Helpful Tools (not included):
- Wire strippers,
- Ladder
CONNECTING WIRES
23W MAX,LED, 120V~, 60Hz (Dimmable LED Included)
- Apply the Silicone gel (not included) around the fixture body where it comes into contact with the wall.
- Outlet Box screw x 2
- Black wire(L) from junction box
- White wire(N) from junction box
- Green wire/Bare copper (G) from the junction box
- Black wire (L) from the fixture
- White wire (N) from fixture
- Green wire/Bare copper from the fixture
- Wire connector x 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>