EUROfase 38267 Bevelo 3 Light Bronze Pendant Instruction Manual
- June 12, 2024
- EUROfase
Table of Contents
EUROfase 38267 Bevelo 3 Light Bronze Pendant
Product Information You have purchased a lighting product that is designed and built to provide you with years of enjoyment. This product includes the following components:
- A-Outlet Box screw x 2
- B-Black wire(L) from junction box
- C-White wire(N) from junction box
- D-Green wire/Bare copper (G) from junction box
- E-Black wire from fixture
- F-White wire from fixture
- G-Green wire/Bare copper from fixture
- H-Wire connector x 3
Product Usage Instructions
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included):
- Flathead screwdriver
- Phillips screwdriver
- Pliers
- Electrical tape
- Wire cutters
- Helpful Tools (not included):
- Wire strippers
- Ladder
- Follow the steps below to assemble the product:
- Attach the A-Outlet Box screws to the appropriate locations.
- Connect the B-Black wire(L) from the junction box to the corresponding wire on the fixture (E-Black wire).
- Connect the C-White wire(N) from the junction box to the corresponding wire on the fixture (F-White wire).
- Connect the D-Green wire/Bare copper (G) from the junction box to the corresponding wire on the fixture (G-Green wire/Bare copper).
- Securely fasten the connections using the H-Wire connectors provided.
38267
INSTRUCTION MANUAL
Thank You
You’ ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture disconnect power by turning the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (Green or Bare Copper) and the Bare Copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included): Flathead screwdriver, Phillips
screwdriver, Pliers, Electrical tape and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder
ASSEMBLY
3 X 60W MAX,T45,120V,60Hz
(Bulbs not included)
- A- Outlet Box screw x 2
- B- Black wire(L) from junction box
- C- White wire(N) from junction box
- D- Green wire/Bare copper (G) from junction box
- E- Black wire from fixture
- F- White wire from fixture
- G- Green wire/Bare copper from fixture
- H- Wire connector x 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>