EUROfase Zilli 5 Light Bath Bar Instruction Manual
- June 12, 2024
- EUROfase
Table of Contents
EUROfase Zilli 5 Light Bath Bar
Product Information
The product you have purchased is a lighting fixture. It is designed and built to provide you with years of enjoyment.
Product Specifications:
- Model Number: 06349122(284063335-0-01111)
- Power Supply: 120V 60Hz
- Bulb Type: G9
- Maximum Wattage: 40W per bulb
- Number of Bulbs: 5
- Included Components: Bulbs, Wire connectors
Product Usage Instructions
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included):
- Flathead screwdriver
- Phillips screwdriver
- Pliers
- Electrical tape
- Wire cutters
- Helpful Tools (not included):
- Wire strippers
- Ladder
- Follow these steps for installation:
- Secure the outlet box screw (A) into the electrical junction box.
- Connect the black wire (B) from the junction box to the black wire (E) from the fixture using a wire connector (H).
- Connect the white wire (C) from the junction box to the white wire (F) from the fixture using a wire connector (H).
- Connect the green wire or bare copper wire (D) from the junction box to the green wire or bare copper wire (G) from the fixture using a wire connector (H).
- Securely tighten all wire connectors (H).
- Ensure that all connections are secure and insulated with electrical tape if necessary.
- Install the bulbs (included) by inserting them into the G9 sockets. Do not exceed the maximum wattage of 40W per bulb.
- Turn on the power and enjoy your new lighting fixture.
Remember to save these instructions for future reference.
INSTRUCTION
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly inturctions by reading the numerical progression.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture disconnect power by turning the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the guage,type and number of conductors.
- Attach junction box grounding wire ( Green or Bare Copper ) and the Bare Copper wire form the Fixture together, If junction box has no ground wire, attach the bare copper Fixture Wire to the Green Ground Screw on the crossbar.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
- Helpful Tools (not included):
- Wire strippers,
- Ladder
5 x 40W Max G9 shielded 120V 60Hz (Bulbs included)
- A- Outlet Box screw x 2
- B- Black wire(L) from Junction box
- C- White wire(N) from junction box
- D- Green wire/Bare copper (G) from junction box
- E- Black wire from fixture
- F- White wire from fixture
- G- Green wire/Bare copper form fixture
- H- Wire connector x 3
Thank You
You’ re just purchased a lighting product designed and built to provide you
with years of enjoment.
Read User Manual Online (PDF format)
Loading......