EUROfase Carlucci 8 Light Chandelier Instruction Manual
- June 12, 2024
- EUROfase
Table of Contents
EUROfase Carlucci 8 Light Chandelier
Product Information
Product Model: 0634912 (2247693757-011).
This product is a lighting fixture designed to provide years of enjoyment.
Specifications:
- Maximum Wattage: 8x60W
- Socket Type: G9
- Voltage: 120V
- Frequency: 60Hz
- Bulbs Included: Yes
Product Usage Instructions
- Estimated Assembly Time : 20 minutes
- Tools Required For Assembly (not included):
- Flathead screwdriver
- Phillips screwdriver
- Pliers
- Electrical tape
- Wire cutters
- Helpful Tools (not included):
- Wire strippers
- Ladder
- Before starting the assembly, make sure to read and understand all the instructions provided in this manual.
- Locate and prepare the necessary tools for the assembly process.
- Identify the following components:
- A-Outlet Box screw x 2
- B-Black wire(L) from junction box
- C-White wire(N) from junction box
- D-Green wire/Bare copper (G) from junction box
- E-Black wire from fixture
- F-White wire from fixture
- G-Green wire/Bare copper from fixture
- H-Wire connector x 3
- Follow the step-by-step assembly instructions provided in the manual.
- Make sure to securely connect the wires according to their color codes and use wire connectors for proper insulation.
- If additional assistance is required, refer back to this manual for guidance.
- Once the assembly is complete, test the product to ensure it is functioning correctly.
- Refer to the product manual for any maintenance or troubleshooting tips.
Thank You
You’ ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
Safety Instruction
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture disconnect power by turning the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (Green or Bare Copper) and the Bare Copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder
Product Parts
8x60W MAX. G9,120 V ,60Hz (Bulbs included)
- A- Outlet Box screw x 2
- B- Black wire(L) from junction box
- C- White wire(N) from junction box
- D- Green wire/Bare copper (G) from junction box
- E- Black wire from fixture
- F- White wire from fixture
- G- Green wire/Bare copper from fixture
- H- Wire connector x 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>