SOLINTEG 3 Phase Hybrid Inverter User Guide
- June 12, 2024
- SOLINTEG
Table of Contents
SOLINTEG 3 Phase Hybrid Inverter User Guide
Check & Operation
Check List
- Battery and inverter CAN wiring
- Inverter and battery ground wiring
- Communication module insertion
- Multi-function connector insertion
- Smart meter wiring and power
Operation order
- AC insurance (if any)
- AC circuit breaker 3. Battery DC switch
- Battery on button
- Inverter PV DC switch
Network Connection Via Solinteg APP
Solinteg APP
Way 1: WiFi Communication
- Plug in WiFi module
- Connect to customer WiFi
- Customer WiFi ID
- Customer WiFi Password
Way 2: LAN Communication
- Plug in the LAN module
- Connect LAN cable to router
PS: If the router does not open DHCP function, you need to configure this function on the inverter
Add Plant and Inverter Via Solinteg Web or APP
Solinteg APP
Create customer account
- Customer Information
- Customer Email (unregistered)
- Required information such as plant type, module capacity, etc.
- Location information
- Add equipment (see nameplate for serial number and verification code)
- Revenue settings
PS: The customer’s email will receive their account and password after the creation is completed
Setting Path:
Plant Management/Add power plant
Parameters Configuration Via Solinteg OR Solinteg Set APP
Solinteg APP
Way 1: Quick Configuration
SolintegSetAPP
Way2: Nearby Configuration
Way 1:
- Select local safety code
- Select battery brand
- Select working mode
- Set on/off-grid parameters
Setting Path:
Plants/Devices/Parameters Setting/Configuration Wizard
Way2:
- Phone connected to the inverter WiFi(Make sure WiFi module is pluggable fore connecting)- WiFi name: WiFi- APxxxxx
- Log in Solinteg Set APP
- Scan device: WiFi- APxxxxx
- Select installer role, password: 123456
- Parameter setting
- Grid parameters
- Battery brand
- Select local safety code
- Select workingmen
- Set on/off-grid SOC value
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>