Lorelli EGO Feeding Chair Instruction Manual
- June 12, 2024
- lorelli
Table of Contents
Lorelli EGO Feeding Chair
Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.
EGO
EGOPlus
IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!
EGO/EGO PLUS – FEEDING CHAIR Instructions for Use
WARNING!!!
- Never leave the child unattended!
- Always use the restraint system and ensure it is correctly fitted!
- Always use the chair attachment system and ensure it is correctly fitted before use!
- Always check the security and the stability of the product on the adult chair before use!
- Always place the Feeding chair on smooth surfaces!
- Do not use this product on stools or benches!
WARNING! To be assembled by an adult.
-
This product Is Intended for children able to sit unaided (minimum 6 months) and up to 36 months or a maximum weight of 15 kg.
-
Minimum dimensions of the chair for adults:
- Height of the back ofthe chair for adults: 380 mm
- Width of the seat of the chair for adults: 390 mm
- Depth of the seat of the chair for adults: 340 mm
-
Ensure that the adult chair with the chair mounted seat is placed in a position where the child is not able to use its feet to push against the table or any other structure as this can cause the tip over of the adult chair supporting the chair mounted seat !
-
Do not use the chair mounted seat if any part is broken, torn or missing!
-
Do not use any accessories or replacement parts other than those approved by the manufacturer!
-
Do not use the product near open fire or other sources of strong heat, such as electric coil stoves, gas stoves, etc.
-
Check the safety belts periodically!
-
Keep the product away from children when not in use
-
The product must not be used as a toy!
-
Make sure that you have tightened the safety belts for the sake of your child’s security.
-
In order to avoid any dangerous situations, the tray must be placed upon using the product!
-
Never remove the armrests from the products. They ensure the safety of your child.
-
Images on the title page and in the instruction manual are only illustrative and may differ from the real product.
-
Before using the product for the first time, remove all advertising material from it as well as the materials used to attach them to the product.
-
EN 16120:2012 + A2:2016
Cleaning and Maintenance
Clean with a wet piece of cloth or cool water and soft soap.
Feeding Chair Assembly
- Unbuckle the belt (Photo 1 ).
- Pull the sides of the tray to remove it from the product (Photo 2).
- Hold the seat and pull the backrest at the same time to unfold the product (Photo 3).
- Adjust the height of the feeding chair by pressing and holding the two gray buttons under the seat (Photo 7).
- Place the tray (Photos 5.1, 5.2).
- Place the feeding chair on the adult chair. Fix the lower feeding chair belt under the seat of the adult chair. Fix the rear feeding chair belt behind the backrest of the adult chair. WARNING: Adjust the buckle to prevent looseness. (Photos 4.1, 4.2, 4.3)
- Ensure that the armrests are fixed correctly to the construction of the feeding chair (photo 6.2).
- Place the child in the feeding chair and buckle the 3-point safety belt (Photo 6.1 ).
- If you need to carry the product, you can use the belt or the built-in handle (Photos 8.1, 8.2).
Didis Ltd.
Bulgaria, Shumen, 6 Trakia-iztok Street
Phone: + 359 54 850 830
e-mails: [email protected];
[email protected]
AIIAIICOOA
6bJ1rapHR, WyMeH, “TpaKHR-H3TOK” 6
Ten. +359 54 850 830
e-mails: [email protected];
[email protected]
Unlc importator in Romania
DIDIS INTERNATIONAL
Strada Sfantul Pantelimon Nr.1
Oras Pantelimon, Judetul llfov
Phone: +40 21 211 65 60
Fax: +40 2121065 62
E-mail: [email protected]