ZKTECO H13A-C Wall Mount Facekiosk User Guide

Quick Start Guide
FaceKiosk-H13A/C
Version: 2.1

Due to regular upgrades of systems and products, ZKTeco could not guarantee exact consistency between the actual product and the written information in this manual.

Components

Wall Mount Facekiosk-H13A

|

Floor Mount Facekiosk-H13C

---|---
|

Installation Procedure

Wall Mount Installation Procedure
Before installation, connect the wire to the device and move it through the device’s lower aperture.

1. Align the backplate to the screw holes on the back of the device.
   

2. Secure the plate with the screws (11 pcs) to the back of the unit.
   

3. Place the rear panel at an appropriate height from the ground. Drill the holes on the wall and fix it.
   

4. Set the device at the desired position on the rear panel that is fixed on the wall.
   

5. Secure the Kiosk by assembling the device and the rear panel with the bottom screw.

Floor Mount Installation Procedure

1. Take the device and the base from the box. Fix the device into the
   

2. Cautiously incline the device horizontally and assemble the device over the base with the screws (8 pcs) from the bottom of the base.
   

Door Sensor, Exit Button & Alarm Connection

Access Control Device Connection

Operational Procedure

Visitor Self-registration Methods

1. Register on the reception desk device.
   

2. Scan the QR code to register via Mobile phone.

Note:
The visitor can register by scanning the QR code on the reception desk device or the QR code on the invitation E-mail sent by the system in advance.
Process Overview
Issues visitor information to the access deviceForbids visitor access after check-out

Install and Uninstall Firmware

1. Install the Firmware via U Disk
   Step 1: Install the CoreService APK first.
   Step 2: Then, install the ZKBioArgus APK.

2. Clear the Data and Uninstall the Firmware
   Click Firmware System Settings > Personality Settings> Android System Settings.
   1. Uninstall both the Core service and ZKBioArgus APK’s.
   2. Uninstall the ZKBioArgus first.

3. Delete the Config and ZKTeco Folders
   1. In the Android Interface, select Explorer > Internal Memory > Delete.
   2. Delete the two Folders Config and ZKTeco.

Software Basic Settings

After completing the following five simple steps, the device will be ready to use for visitor management.

1. Set the Server details on the device.
   E.g: http://110.80.38.74:8658
   Server Address: 110.80.38.74
   Communication Port: 8158
   Server Port: 8658

2. Add the device to the FaceKiosk Module of the software.

3. Set the device as an Entry device.
   Click Visitor Module > Basic Management > Entry Place > New.

4. Add the sender’s mailbox to the software. The system will send an Email through the sender’s mailbox.
   Click Software System > Basic Management > E-mail Management.

5. Select an employee as the host.
   Click Visitor > Basic Management > Host Levels > New.

Home Screen and Connectivity Status

Visitor Management

1. Visitor Registration
   Face Recognition| Can be turned on or off, and grant access through facial recognition
   ---|---
   Temperature Detection| Can be turned on or off and this function is only available when guests register on the device
   Fill Personal information| Fill in the details such as Name, Phone number, E-mail address, Company name, etc.
   Host and Reason| Host – Select the employee you want to visit
   Reason – Select the purpose of visit

2. Visitor Check-in
   Tap the Check-in & Check-out button to check in.

3. Facial Recognition
   Visitors can enter the premises through facial recognition.

4. Visitor Check-out
   Tap the Check-in & Check-out button to check out.

5. Reports
   Export reports with complete visitor information from the software immediately.

You’re all set to use Visitor Management!

ZKTeco Industrial Park, No. 32, Industrial Road,
Tangxia Town, Dongguan, China.
Phone : +86 769 – 82109991
Fax : +86 755 – 89602394
www.zkteco.com
https://www.zkteco.com/en/
Copyright © 2021 ZKTECO CO., LTD.
All Rights Reserved.

References

• ZKTeco | Biometrics and Computer Vision

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>