EURofase 38269 Bevelo 6 Light Oval Chandelier Instruction Manual
- June 12, 2024
- EUROfase
Table of Contents
EURofase 38269 Bevelo 6 Light Oval Chandelier
Thank You
You’ ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
Product Usage Instructions
- Identify the outlet box screw (A) and secure the lightingfixture to the outlet box using the provided screws.
- Locate the black wire (L) coming from the junction box (B) and connect it to the black wire (E) from the fixture using a wire connector (H).
- Find the white wire (N) from the junction box (C) and connect it to the white wire (F) from the fixture using another wire connector (H).
- Locate the green wire/bare copper (G) from the junction box (D) and connect it to the green wire/bare copper (G) from the fixture using a wire connector (H).
- Secure all wire connections with electrical tape for added safety.
- Use wire cutters to trim any excess wire length.
- If necessary, use wire strippers to strip the insulation from the ends of the wires.
- Ensure all connections are secure and there are no loose wires.
- Follow any additional instructions provided in the user manual for specific features or settings of the lighting product.
INSTRUCTIONS
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture disconnect power by turning the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (Green or Bare Copper) and the Bare Copper wire from the fixture together.
- If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
Estimated Assembly Time: 20 minutes
Tools Required For Assembly (not included): Flathead screwdriver,
Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
Helpful Tools (not included): Wire strippers, Ladder
6 X 60W MAX,T45,120V,60Hz (Bulbs not included)
OVERVIEW
- A- Outlet Box screw x 2
- B- Black wire(L) from junction box
- C- White wire(N) from junction box
- D- Green wire/Bare copper (G) from junction box
- E- Black wire from fixture
- F- White wire from fixture
- G- Green wire/Bare copper from fixture
- H- Wire connector x 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>