Eurofase 37071 Ryder 5 Light Bath Bar Instruction Manual
- June 12, 2024
- EUROfase
Table of Contents
Eurofase 37071 Ryder 5 Light Bath Bar
Product Information
- Product Model: 37071
- Product Type: Lighting Fixture
- Power Source: 120V, 60Hz
- Maximum Wattage: 25W
- Number of Lights: 5
- Dimmable: Yes
- LED Included: Yes
Product Usage Instructions
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included):
- Flathead screwdriver
- Phillips screwdriver
- Pliers
- Electrical tape
- Wire cutters
- Helpful Tools (not included): Wire strippers, Ladder
- Ensure the power source is turned off before starting the assembly process.
- Open the packaging and identify all the components mentioned in the instruction manual.
- Attach the lighting fixture to the outlet box using the provided screws (A).
- Connect the black wire (L) from the junction box (B) to the black wire (L) from the fixture (E) using a wire connector (H).
- Connect the white wire (N) from the junction box (C) to the white wire (N) from the fixture (F) using a wire connector (H).
- Connect the green wire/bare copper (G) from the junction box (D) to the green wire/bare copper from the fixture (G) using a wire connector (H).
- Repeat steps 6-8 for each additional light if applicable.
- Securely tighten all wire connections using pliers.
- Use electrical tape to cover any exposed wire connections.
- If dimming functionality is desired, follow the instructions provided with the included dimmable LED.
- Turn on the power source and test the lighting fixture.
- Refer to the specific maintenance instructions for cleaning and care of the lighting fixture.
For any further questions or assistance, refer to the instruction manual or contact our customer support.
Thank You
You’ ve just purchased a lighting product designed and built to provide you
with years of enjoment.
INSTALLATION INSTRUCTION
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder
Dimension
- 5-LIGHT 25W MAX 120V,60Hz
- (Dimmable LED Included)
- A -Outlet Box screw x 2
- B -Black wire(L) from junction box
- C -White wire(N) from junction box
- D -Green wire/Bare copper (G) from junction box
- E -Black wire (L) from fixture
- F -White wire (N) from fixture
- G -Green wire/Bare copper from fixture
- H -Wire connector x 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>