EURofase 38154 Metallo 4 Light Semi Flush Mount Instruction Manual
- June 12, 2024
- EUROfase
Table of Contents
EURofase 38154 Metallo 4 Light Semi Flush Mount
Product Information
You have purchased a lighting product designed to provide you with years of enjoyment. This product requires assembly and comes with the following components:
- A-Outlet Box screw x 2
- B-Black wire(L) from junction box
- C-White wire(N) from junction box
- D-Green wire/Bare copper (G) from junction box
- E-Black wire (L) from fixture
- F-White wire (N) from fixture
- G-Green wire/Bare copper from fixture
- H-Wire connector x 3
Product Usage Instructions
Please follow the instructions below to assemble and install the lighting product:
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape, and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder
- Identify the components mentioned above (A-H).
- Using the flathead screwdriver and Phillips screwdriver, attach the outlet box screws (A) to the designated spots on the fixture.
- Connect the black wire (B) from the junction box to the black wire (E) from the fixture using a wire connector (H).
- Connect the white wire (C) from the junction box to the white wire (F) from the fixture using another wire connector (H).
- Connect the green wire/bare copper (D) from the junction box to the green wire/bare copper (G) from the fixture using the remaining wire connector (H).
- Ensure all connections are secure and use electrical tape to cover any exposed wires.
- Use pliers and wire cutters as necessary to trim and secure wires.
- Once assembled, mount the lighting product according to the manufacturer’s instructions, ensuring it is securely attached to a suitable surface or outlet box.
- Follow any additional instructions provided in the user manual for proper usage and maintenance of the lighting product.
Please refer to these instructions whenever you need assistance with the assembly, installation, or maintenance of your lighting product.
Thank You
You’ ve just purchased a lighting product designed and built to provide you
with years of enjoyment.
INSTALLATION INSTRUCTION
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
- Follow the assembly instructions by reading the numerical progression.
- Use a qualified electrician for installation of this lighting fixture.
- Before installing fixture, disconnect power by turning off the circuit breaker or by removing the fuse at the fuse box.
- All electrical connections must be in accordance with local and National Electrical Code or Canadian Electrical Code standards.
- Use CSA or UL listed wire connectors suitable for the gauge, type and number of conductors.
- Attach junction box grounding wire (green or bare copper) and the bare copper wire from the fixture together. If junction box has no ground wire, attach the bare copper fixture wire to the green ground screw on the crossbar.
- Estimated Assembly Time: 20 minutes
- Tools Required For Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape and Wire cutters.
- Helpful Tools (not included): Wire strippers, Ladder
Dimension
- 4 X 60W MAX,G25,120V,60Hz
- (Bulb not include)
- (Bulb not include)
- A- Outlet Box screw x 2
- B -Black wire(L) from junction box
- C -White wire(N) from junction box
- D -Green wire/Bare copper (G) from junction box
- E -Black wire (L) from fixture
- F -White wire (N) from fixture
- G -Green wire/Bare copper from fixture
- H-Wire connector x 3
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>