Vertiv Avocent ACS8000 Advanced Console Server Specifications And Datasheet
- June 12, 2024
- VERTIV
Table of Contents
Vertiv Avocent ACS8000 Advanced Console Server
Introduction
The Avocent® ACS8000 advanced console server series continues the long-running success story with a new, ground-up platform of innovation, integrating important new connectivity features such as cellular, gigabit fiber, USB, and sensors. IT professionals and network operations center (NOC) personnel can now harness these new capabilities to further enable them to perform secure, remote data center management and out-ofband management of IT assets from anywhere in the world.
Featuring a dual-core ARM processor architecture with expanded memory capabilities, the updated Linux operating system and DSView™ management software provide the Avocent® ACS8000 optimal performance, security, and reliability for a complete out-of-band management solution.
Applications
- Secure console and power management
- Server and network management
- Secure access to test and development lab environments
- Telco central office and remote facilities
Benefits
- NEW! Cellular connectivity provides both primary WAN interface and secondary failover support
- NEW! – Environmental sensor port gives visibility into onsite conditions
- Secure in-band and out-of-band network remote management
- Fast, automated configuration with Zero Touch Provisioning
- Access and troubleshoot remote locations using automatic network failover to cellular, Ethernet or analog modem
- No need for adaptors with automatic Cyclades™ and Cisco pin-out conversions
- Compliance with data center access and security policies customizable, multiple access levels
- Expanded support for Rack PDUs from Vertiv™ Geist™, ServerTech, APC, Raritan and Eaton
- Support for Vertiv™ GXT4 and Vertiv™ GXT5 UPS systems
- IPv6 and IPv4 support for new network deployments
- Integration with Avocent® DSView™ software for centralized management
- Strong dial-up and secure dial-back using optional built-in modem
- Console event logging and notification, including “last gasp” capture
- Regulatory compliance and easy troubleshooting – online and off-line data logging with time stamps
- Integrated support for 1Gb SFP fiber modules
- 8 USB ports to support new IT equipment with USB console ports as well as external peripherals
Hardware Specifications
| Specifications | Details |
|---|---|
| CPU | Dual-core ARM Cortex-A9 MPCore with CoreSight |
| Memory | – 1GB DDR3L RAM |
| – 16GB eMMC Flash | |
| Interfaces | – 2 Gigabit Fiber SFP ports |
| – 2 Gigabit (10/100/1000BT) Ethernet interfaces on RJ45 | |
| – 1 RS-232 serial console port on RJ45 | |
| – Up to 48 RS-232 serial ports on RJ45 | |
| – First 2 ports selectable between RS-232/RS-422/RS-485 | |
| – 8 USB 2.0 Ports on Type A connector | |
| – 1 full-size SD Card slot | |
| – Environmental sensor port on RJ45 (1-wire) | |
| – 4 digital-in ports (smoke, leak, pressure, and dry contact sensors) | |
| Power | – Internal 100–240 VAC, 50/60 Hz |
| – Optional –48 VDC power supply | |
| – Optional dual entry, redundant AC and DC power supplies | |
| Power Usage | – Nominal voltage 120VAC: |
| – Typical 0.13A, 6.2W | |
| – Maximum 0.47A, 28W | |
| – Nominal voltage 240VAC: | |
| – Typical 0.10A, 7W | |
| – Maximum 0.29A, 28W | |
| – Nominal voltage 48VDC (±20%): | |
| – Typical 0.22A, 11W | |
| – Maximum 0.67A, 33W | |
| Operating Temperature | 14°F to 140°F (-10°C to 60°C) |
| Storage Temperature | -4°F to 158°F (-20°C to 70°C) |
| Humidity | 20% to 80% Non-condensing Relative Humidity |
| Non-operating Humidity | 5% to 95% Non-condensing Relative Humidity |
| Dimensions (W x D x H) | 17.25W x 9.5D X 1.75H in (43.82 x 24.13 x 4.45 |
cm)
Weight| 6.4 – 7.2 lbs
Certifications| Details
---|---
Emissions and Immunity:| – FCC Class A
| – CE Class (EU)
| – ICES-003 (Canada)
| – VCCI (Japan)
| – RCM (Australia)
| – Customs Union (CU)
| – KCC (Korea)
Safety:| – UL (USA)
| – cUL (Canada)
| – EN-60950 (EU)
| – CB
| – Customs Union (CU)
| – UL 60950-1 2nd ED (Cellular related)
| – cUL 60950-1 2nd ED
| – IEC 60950-1 2nd ED (Cellular Related)
EMC/Radio Compliance (Cellular Related)| – FCC Part 15 Class B
| – FCC Part 22, 24, 27
| – CE mark, RED (EU cellular)
Network (Cellular Related)| – PTCRB
Cellular Type| 4G/LTE (2FF/mini SIM card slot)
Cellular Frequency Bands (MHz)| – 4G: B12/B13(700), B5(850),
B4(AWS1700), B2(1900)
| – 3G: B5(850), B2(1900)
EU Version:| – 4G: B1(2100), B3(1800), B7(2600), B8(900), B20(800),
B28A(700)
| – 3G: B1(2100), B3(1800), B8(900)
| – 2G: B3(1800), B8(900)
Address: Vertiv Headquarters, 1050 Dearborn Drive, Columbus, OH, 43085, USA
Trademarks
© 2020 Vertiv Group Corp. All rights reserved. Vertiv™ and the Vertiv logo are trademarks or registered trademarks of Vertiv Group Corp. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness here, Vertiv Group Corp. assumes no responsibility and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications, rebates, and other promotional offers are subject to change at Vertiv’s sole discretion upon notice.
FAQ’s
What is the Vertiv Avocent ACS8000 Advanced Console Server?
The Vertiv Avocent ACS8000 is an advanced console server designed to provide remote access and control to IT devices in data centers and remote locations.
What are the key features of the ACS8000 console server?
The ACS8000 console server offers features such as secure remote access, serial device management, power control, monitoring, and environmental sensing.
How does the remote access feature work?
The remote access feature allows authorized users to access and manage IT devices from anywhere with an internet connection, enhancing flexibility and efficiency.
Can the ACS8000 console server manage multiple serial devices?
Yes, the ACS8000 can manage multiple serial devices, enabling administrators to control and troubleshoot various equipment remotely.
What power control capabilities does the ACS8000 offer?
The ACS8000 often provides power control functionalities, allowing users to remotely power on, off, or reboot devices, minimizing downtime.
Does the console server offer monitoring features?
Yes, the ACS8000 can monitor device status, performance, and environmental conditions, providing valuable insights for proactive maintenance.
What types of environmental sensing are supported?
The console server might support environmental sensors to monitor factors such as temperature, humidity, and airflow within the data center.
What security measures are in place for remote access?
The ACS8000 often employs security features like encryption, authentication, and authorization to ensure secure remote access and protect sensitive data.
Can the ACS8000 be integrated with existing IT infrastructure?
Yes, the ACS8000 is designed to seamlessly integrate with existing IT infrastructure and management systems.
What is the user interface of the ACS8000 like?
The ACS8000 typically features a user-friendly interface that allows administrators to easily configure and manage connected devices.
Is the ACS8000 scalable?
Yes, the ACS8000 console server is often scalable, enabling organizations to expand their remote access capabilities as their needs grow.
What support options are available for the ACS8000?
Support options can vary and might include technical assistance, software updates, and maintenance services. Check with the manufacturer or distributor for details.
Can the ACS8000 be rack-mounted?
Yes, the ACS8000 console server is often designed for rack-mounted installation, saving valuable space in data center environments.
References:Vertiv Avocent ACS8000 Advanced Console Server – Device.report
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>