POLARIS TIF01 2020 Toyota 79 Series Reverse Camera Integration Instructions
- June 12, 2024
- Polaris
Table of Contents
TIF01 kit—2020 Toyota 79 series Instructions
TIF01 2020 Toyota 79 Series Reverse Camera Integration
- Plug connector A directly into the back of the head unit
- Plug connector B & C together
- Plug Polaris miniature camera into connector D
- Locate the 28 pin plug in the head unit (See Figure A)
- There is a GREEN wire from this pin that runs to a coil of black tubing. You should see a clip on the end of the GREEN wiring and this is needs to run to your reverse power.
- Attach the clip to your reverse power which is a RED wire with BLACK stripe located in the DRIVERS SIDE KICK PANEL OR THE STEP PANEL
- Put vehicle in reverse to test.
Note: If you do not have the camera plugged in when testing then nothing will happen on the screen
1300 555 514
Documents / Resources
|
POLARIS TIF01 2020 Toyota 79 Series Reverse Camera
Integration
[pdf] Instructions
TIF01, TIF01 2020 Toyota 79 Series Reverse Camera Integration, 2020 Toyota 79
Series Reverse Camera Integration, Reverse Camera Integration, Camera
Integration, Integration
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>