V I V O STAND-V001 Single Monitor Desk Mount Instruction Manual

: June 12, 2024
: V I V O

Table of Contents

STAND-V001 Single Monitor Desk Mount
PACKAGE CONTENTS
ASSEMBLY STEPS
Documents / Resources

Single Monitor Desk Mount
Instruction Manual V I V O STAND V001 Single Monitor Desk
Mount SKU: STAND-V001,W

STAND-V001 Single Monitor Desk Mount

Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
https://vivo-us.com/products/stand-v001
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

| help@vivo-us.com
---|---
| www.vivo-us.com
Chat live with an agent!
| 309-278-5303

WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR STAND.
USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

PACKAGE CONTENTS

V I V O STAND V001 Single Monitor Desk Mount - PACKAGE
CONTENTS NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

ASSEMBLY STEPS

STEP 1
Option A: Desk Clamp Install Loosen Clamp Bolt (B1) on Clamp (B). Install Clamp (B) to Pole (A) using M6x16mm Screws (S-A) and 3mm Allen Wrench (T-A). Secure the clamp assembly to the desktop. V I V O STAND V001 Single Monitor
Desk Mount - ASSEMBLY STEPS Option B: Grommet Install
Using a Phillips screwdriver, remove the screw from Clamp (B) and separate Clamp Bolt (B1) and Clamp Plate (B2) from the clamp assembly.
Thread Clamp Plate (B2) onto Blamp Bolt (B1). V I V O STAND V001 Single
Monitor Desk Mount - ASSEMBLY STEPS 1 Install Grommet Base (E) to Pole (A) using M6x16mm Screws (S-A) and 3mm Allen Wrench (T-A). Remove adhesive backing from Soft Pad (F) and stick it to the bottom of Grommet Plate (E).If not using an existing through-hole for mounting, use a 3/8” (10mm) drill bit to create a mounting hole in the desired location. Thread Clamp Bolt (B1) with Clamp Plate (B2) through the mounting hole and into Pole (A). V I V O STAND V001 Single Monitor Desk Mount - ASSEMBLY STEPS
3 STEP 2
Slide Pole Cable Clip (I) and Arm (C) over Pole (A). Secure Arm (C) at the desired height using 5mm Allen Wrench (T-B). Insert Pole Cap (G) into the top of Pole (A).STEP 3
Attach Arm Cable Clips (H) to Arm (C). STEP 4
OPTION A: Flat Back Monitor
Attach the VESA plate (D) to the monitor with Thumbscrews (M-A).
NOTE: Hand tighten screws to avoid over tightening. V I V O STAND V001
Single Monitor Desk Mount - ASSEMBLY STEPS 6 OPTION B: Curved Back Monitor
Attach the VESA Plate (D) to the monitor with M4x30 Screws (M-B) and M6 Spacers (M-C).
NOTE: Gently tighten using a screwdriver V I V O STAND V001 Single
Monitor Desk Mount - ASSEMBLY STEPS 7 STEP 5
Slide VESA Plate (D) with the monitor onto Arm (C). Secure the assembly in place using M6 Nut (S-B). V I V O STAND V001 Single Monitor Desk Mount -
ASSEMBLY STEPS 8 STEP 6
Manage cables using Arm Cable Clips (H) and Pole Cable Clip (I). V I V O
STAND V001 Single Monitor Desk Mount - ASSEMBLY STEPS 9 STEP 7
Adjust the tilt using 5mm Allen Wrench (T-B). V I V O STAND V001 Single
Monitor Desk Mount - ASSEMBLY STEPS 10 Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
LAST UPDATED: 05/11/2023
REV2.1 Open Monday – Friday 7:00am – 7:00pm CST,
our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.

| www.vivo-us.com
Chat live with an agent!| AVG. RESOLUTION TIME (within office hrs): < 15 M
---|---|---
| 309-278-5303| AVG. RESOLUTION TIME (within office hrs): 5M 4S
| help@vivo-us.com| AVG. RESPONSE TIME (within office hrs): 1HR 8M
– 23% within < 15m
– 38% within < 30m
– 61% within < 1hr
– 83% within < 2hr
– 92% within < 3hr

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT:
www.vivo-us.com

Documents / Resources

| V I V O STAND-V001 Single Monitor Desk Mount [pdf] Instruction Manual
STAND-V001, STAND-V001 Single Monitor Desk Mount, Single Monitor Desk Mount, Monitor Desk Mount, Desk Mount, Mount
---|---