VIGO VG6075MGFL3462 Zenith 34-in x 62 In Frameless Fixed Matte Brushed Gold Standard Bathtub Door Instruction Manual
- June 12, 2024
- VIGO
Table of Contents
INSTALLATION MANUAL
VIGO Frameless Fixed Tub
Screen
with Clear Glass/ Fluted Glass
REGISTER YOUR PRODUCT
in order to active your warranty you must register your product
https://qr-creator.com/d/800562044
vigoindustries.com/register
ACTIVATE NOW
PRODUCT FEATURES
- Fixed glass panel creates an open tub shower area
- Reversible left or right side installation
- ANSI 297.1 and 16 CFR 1201-certfied clear tempered glass
- Vertical and bottom rail support ensures wall anchoring and reinforces wall stability
- Full length vertical and bottom clear seals keep the shower watertight between the glass screen and structural rals
- Quality 304-seri taintless steel constructed hardware in a premium finish guaranteed to never rust
CERTIFICATE & WARRANTY
ANS! 297.1 and 16 GFR 1201-certfied glass
All VIGO Shower Door have a Limited Lifetime Warranty NOTE
VIGO reserves the rights to modify/update all adware and glass ‘components
based on bettering the product for the end user’s ‘experience.
If you have any questions contact VIGO Tech Support at 1-886.501
SAFETY PRECAUTIONS
This Installation Guide uses the following symbols to indicate important
information. Always observe the instructions indicated by these symbols.
WARNING
Instructons that, if ignored, could resutindeath o serous personal fury caused
by Incorrect handing o instalation of the product. These instructons must be
observed forsake sabaton.
IMPORTANT
Maintenance and attar portantnon-personality and on-material damage
Minisuctions or stamens hat should be Gorged.
IT IS HIGHLY ADVISED TO DRY FIT THE UNIT PRIOR TO ANY INSTALLATION.
VIGO Product Support 866-591-7792
(Option 2) Monday – Friday 9:30am – 5:30pm EST
Dimensions
| Model | Dimension A | Height | Fixed Panel |
|---|---|---|---|
| VGBO7SXXCLIFLSA 3462 | 34″ | 62″ | 33/3/4″×61/34″ |
- VIGO strongly recommends this installation be completed by a licensed professional. Installation of door unit requires at least two people.
Important
Handle fragile items with care to prevent personal injury or material damage.
Important
Fiberglass, acrylic or sheetrock construction might not be sufficiently
strong enough to support the shower door enclosure. You should use the wood
framing from behind the face edge of the stall to provide a secure mounting o
the door. Apply a bead of silicone between the walls and base of the stall.
For optimum performance, you should install the shower door perfectly level on
a level surface. By not leveling the unit during construction the unit may
leak causing possible water damage.
Parts List
- White Plastic Anchors (x 5)
- Hex Screw 1 %” (x 5)
- Vertical Wall Rail (x 1)
- Vertical Rail Seal Strip (x 1)
- Fixed Panel (x 1) *Clear glass OR Fluted Glass
- Bottom Rail (x 1)
- Bottom Rail Seal Strip (x 1)
GLASS THICKNESS 36″ ESPESOR DEL VIDRIO 36″/ EPAISSEUR DU VERRE 38
NOTE: INSTALLATION MUST BE DONE BY A QUALIFIED, LICENSED PROFESSIONAL.
REMARQUE : LINSTALLATION DOIT ETRE EFFECTUEE PAR UN PROFESSIONNEL
QUALIFIE ET LICENCIE
Plastic Anchor| Hex Screw 19″| Vertical Wall Rail | Vertical Rail Seal Strip
(Clear Glass)| Vertical Rail Seal Strip (Fluted Glass)
---|---|---|---|---
Bottom Rail Seal Strip (Clear Glass)| Bottom Rail Seal Strip (Fluted Glass)|
Fixed Panel – Clear Glass | Fixed Panel (Fluted Glass)| Bottom Rail
Recommended Tools
Assorted screwdrivers| Electric drill | Ø1/4″ and Ø5/16″ drill bit
depending on Wall) | Level| Shims (1ot included)
---|---|---|---|---
Measuring tape| Pencil (ron-permane) | Clear silicone caulking| Utility knife
| Heavy duty gloves
Prior to Installation
- Compare items on your invoice with what you have received. Carefully review the Parts List on page 3. If any items are missing, contact VIGO Industries at 1-866-591-7792.
- Please check our website at www.vigoindutstries.com for additional information or installation videos.
- Remove the plastic layer from the base (if needed). Do not remove the plastic layer off plastic platform of the base.
- Properly apply silicone to the wall and base joints.
- To prevent damage to the finish, shield the shower bottom with a cardboard protector before beginning the installation.
- Ensure that there is sufficient structural support behind the shower wall to hold the weight of the fixed panel installation.
- Fiberglass, acrylic or sheetrock construction may not be strong enough to support the fixed panel. Use the wood framing from behind the face edge of the stall to provide a secure mounting to the door. Apply a bead of silicone between the walls and base of the stall.
- For optimum performance, install the fixed panel on a level surface.
- Use heavy duty gloves during installation.
- The design of this unit has open space in the back of the shower, leaving the potential for water leakage.
- This clear glass model is reversible and can be installed to the right or left side. (See configuration diagram below)
Installation Steps 
1.1 STEP 1.1
1.1) Installing the vertical rail
- Clean the vertical wall rail (#3) with rubbing alcohol.
- Place the vertical wallball to the preferred configuration,
- Make sure the vertical rails resting on the tub and is level
STEP 1.2
1.2) Installing the vertical rail
Mark the center of the holes on the wall for the mounting screws
Installation Steps 
STEP 1.3
1.3) Installing the vertical rail
- Remove the vertical wall ail (43).
- Drill holes into the wall where marked
- Pelage plastic anchors (#1) inside the holes.
STEP
1.4
1.4) Installing the bottom rail
- Place the wall vertical rai (43)
- Screw into the plastic anchors (#1) with 1 5/8” hex screws (#2)
Installation Steps
STEP 1.5
1.5) Installing the bottom rail
- Position the bottom rail(#6) on the tub, perpendicular to the vertical wall rail(#3).
- Both rails have a 45° angle to ensure a perfect connection.
- Make sure their edges meet. To be sure the bottom rail s straight measure the distance (#) from each end to the back wall. They should be the same.
STEP
1.6
1.6) Installing the bottom rail
- Replace the bottom rail (46)
- Apply ep0xy to the bottom rail and attach it to the tub.
NOTE: We do not recommend drilling holes at the tub. STEP 1.7
1.7) Installing the seal strips- Clean the fixed panel (#5) with rubbing alcohol.
- Install the vertical rail seal strip (#4) and bottom rail seal step (#7) to the fixed panel (#5).
- The top end of the seal strip (#4) should meet the top of the glass.
- The bottom end should leave a gap of 10mm from the bottom of the glass.
STEP
1.8
1.8) Installing the glass
- Insert the glass into the bottom rail and siideitinto the vertical wall rail
STEP
1.9
1.9) Apply silicone
- Apply clear silicone caulking to the wall and the tub side of the fixed panel.
REGISTER YOUR PRODUCT
In order to activate your warranty, you must register your product.
https://qr-
creator.com/d/800562044
vigoindustries.com/register
SHARE YOUR VIGO PRODUCT AND GET FEATURED!
We hope you love your new VIGO item as much as we do!
Feel free to leave a review on vigoindustries.com and don’t
forget to share any photos on Instagram with #vigoindustries
The best renovations will be featured on
blog.vigoindustries.com and @vigoindustries
social media.
Share your VIGO product and tag
vigoindustries
for a chance to be featured. VIGO Product Support 866-591-7792 (Option 2) Monday – Friday 9:30am – 5:30pm EST
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>