TRANSLITE GLOBAL TL-HS12 4K30Hz HDMI Splitter With Extender Owner’s Manual
- June 12, 2024
- TRANSLITE GLOBAL
Table of Contents
TL-HS12 4K30Hz HDMI SPLITTER WITH EXTENDER
Owner’s Manual
TL-HS12 4K30Hz HDMI Splitter With Extender
Translate GlobalX’s TL-HS12 is a 1-input, 2-output splitter extender kit that
can distribute one HDMI source to two identical displays over network cables
simultaneously. It supports 4K@30Hz signals with a transmission distance of up
to 130 feet and can transmit 1080p@60Hz signals up to 230 feet over a
CAT6/6A/7 network cable. It also supports bi-directional IR passthrough, HDR10
and 3.5mm L/R audio output functions.
4K@30Hz HDR Quality
Visually lossless transmission
Lightning, Surge & ESD Protection
Secured and reliable signal transmission
Zero Latency Transmission
Supports CAT6/6A/7 network cable and the maximum transmission distance can
reach up to 230 feet for 1080p@60Hz signals & 130 feet for 4K@30Hz signals
with outstanding picture quality and details
CONNECTION INSTRUCTIONS
- Connect the source device to the HDMI IN port of the transmitter with a HDMI cable and connect the HDMI OUT port of the receiver to the display device with another HDMI cable.
- Use a CAT6/6A/7 cable to connect the RJ45 port of the transmitter and receiver.
- If using HDMI loop out, connect the display device to the HDMI OUT port of the transmitter.
- IF using IR passthrough, the IR blaster extension cable should plug in to the IR OUT port, the IR receiver extension cable should plug in to the IR IN port.
- To output audio additionally, connect the speaker to the L/R port of the receiver with a 3.5mm stereo audio cable.
- Plug the power supply into the devices to get started.
- Note that the emitter of the IR blaster extension cable should be as close as possible to the IR receiving window of the source device.
APPLICATIONS
SPECIFICATIONS
Technical
Parameters| Transmitter| Receiver
HDMI compliance| HDMI 1.4
HDCP compliance| HDCP 1.4
Transmission medium| Network cable CAT6/6A/7
Transmission distance| 1080p@60Hz ≤ 230 feet, 4K@30Hz ≤ 130 feet
Video bandwidth| 10.2Gbps
Video support| 800×600, 1024×768, 1280×720, 1280×960, 1366×768,
1440×900, 1680×1050, 1920×1080, 480i@60Hz, 480p@60Hz,
576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz,
1080p@24/25/30/50/60Hz, 4K@24/25/30Hz
Audio support| PCM, LPCM, DTS-HD, DTS-Audio
Input TMDS signal| 0.7~1.2Vp-p
Input DDC signal| 5Vp-p
RS232 support| 3Pin: GND-RxD-TxD, follows RS-232 levels
Default baud rate: 9600
HDR10| Supported
HDMI Loop-out| Supported
IR pass-back| Bi-directional IR passbook (20-60khz)
IR frequency range (KHz)| 20-60Khz
Input| HDMI×1，DC2.1×1, 3.5mm
jack (IR)×1| DC2.1×1, RJ45×1, 3.5mm
jack (IR) ×1
Output| HDMI×1, RJ45 ×2, 3.5mm jack
(IR) x1| HDMI×1, 3.5mm jack (IR)
×1, 3.5mm jack (Audio) ×1
Protection| Lightning, ESD and Surge protection
HDMI connector| Type A 19 Pins, Female
Mechanical
Parameter| Transmitter| Receiver
Housing| Iron| Aluminium alloy material + crystal panel
Dimensions (L×W×H mm)| 151.5(L) x 86.5(W) x 19.0(H)mm| 75.0(L) x 80.0(W)
x 18.0(H)mm
Net weight| 280g| 160gx2
Power supply| 5V/1A| 5V/500mA
Power consumption| <7.5W| <2.5W
www.transliteglobal.com
sales@transliteglobal.com
+1 (713) 979 4401