TRANSLITE GLOBAL TL-MC84 MoCA 2.5 Network Adapter User Guide

TL-MC84
Quick Start Guide
MoCA® 2.5 Network Adapter

Package Contents

ONE PACK
1x Network Adapter
1x Coaxial Cable
1x Ethernet Cable
1x Power adapter
1x Quick Start Guide| TWO-PACK
2x Network Adapter
2x Coaxial Cable
2x Ethernet Cable
2x Power adapter
1x Quick Start Guide
---|---

https://hellomoca.transliteglobal.com/#/

helloMoCA.transliteglobal.com

YOUR ASSISTANT ON EVERY DEVICE
With simple powerful guides and illustrations; we help through setup and support of your MoCA® adapter.
Easily downloaded to a phone or any other device supporting PWA’s.
HASSLE-FREE INSTALLATION
WITH YOUR
NEW VIRTUAL PRODUCT ASSISTANT
SCAN THE QR CODE NOW TO DOWNLOAD

Setup Instructions: (MoCA Adapter Connection to a Router Setup)

Setup Instructions: Router

ROOM 1

1. Unbox your MoCA 2.5 Network Adapter

2. Connect your Adapter to a power outlet

3. Connect one ethernet cable from the router to the TL-MC84 Network Adapter

4. Connect a coax cable from the MoCA port on the Network Adapter to the coax wall outlet
   Note:
   If you have a splitter, make sure the splitter is a MoCA splitter that supports frequencies up to 1675MHz.
   (Splitter Connection: Connect a splitter to the coax cable coming from the coax outlet on the wall and then connect a coax cable from the splitter to the MoCA port of the Network Adapter)
   POE Filter: A POE filter may be used at the point of entry if needed. ROOM 2
   

5. Unbox your second MoCA 2.5 Network Adapter

6. Connect your Adapter to a power outlet

7. Locate the coax wall outlet and connect a coax cable from the wall outlet to the MoCA port of the Network Adapter.
   IMPORTANT: When the MoCA LED is GREEN on both adapters, your adapters are working

8. Connect a networking device using a LAN cable to either of the network ports and test the connection
   Note:
   You may use both the Ethernet ports. There are two 1G ports that can be used as a HUB to connect to more than one networking device. It is important that you do not form a loop in your connection.

(MoCA Adapter Connection to a Cable Modem)

(Internet + Tv)

Cable Modem – ROOM 1

1. Unbox your MoCA 2.5 Network Adapter

2. Connect your Adapter to a power outlet

3. Connect one ethernet cable from the Cable Modem to the TL-MC84 Network Adapter

4. Connect a MoCA splitter to the coax cable coming from the coax outlet on the wall.
   Note: make sure the splitter is a MoCA splitter that supports frequencies up to 1675MHz.

5. Connect one coax cable from the splitter to the MoCA port of the Network Adapter and another coax cable from the same splitter to the coax port of the cable modem.
   Note:
   If you have a TV or set-top box near your modem, connect a coax cable from the splitter to the TV or set-top box.
   POE Filter: A POE filter may be used at the point of entry if needed.
   Cable Modem – ROOM 2
   

6. Unbox your second MoCA 2.5 Network Adapter

7. Connect your adapter to a power outlet

8. Locate the coax wall outlet and connect a coax cable from the wall outlet to a MoCA splitter

9. Connect a coax cable from the splitter to the MoCA port of the Network Adapter.
   IMPORTANT: When the MoCA LED is GREEN on both adapters, your adapters are working.
   Connect a networking device using a LAN cable to either of the network ports and test connection.

Note:
You may use both the Ethernet ports. There are two 1G ports that can be used as a HUB to connect to more than one networking device.
It is important that you do not form a loop in your connection.

Setup Instructions: ( MoCA Adapter Connection to a Cable Modem)

(Internet Only)

DOCSIS 3.1 Cable Modem

If you are using a DOCSIS 3.1 Cable Modem, changes on the network adapters will have to be made. You may follow the steps below or request Translite for a firmware suitable for the Docsis3.1 environment.

1. Log in to the network adapter using the default
2. IP address 192.168.144.200
3. Click on TL-MC84 Settings and make sure
4. D-Ext and D-Low are unchecked
5. The LOF has to be changed to 1400 as well
   Once steps 2 and 3 are completed, save the settings and after reboot, the adapters will be compatible in DOCSIS 3.1environment
   Note: For DOCSIS 3.0 cable modem, the default firmware that comes installed on the device should work as-is.

Contact Support

Firmware Upgrades
For firmware upgrades, you may visit our website www.transliteglobal.com or send an email to [email protected]

For Sales
North America: [email protected]
Asia: [email protected]
Rest of the World: [email protected]| For Support
North America: [email protected]
Asia:[email protected]
Rest of the World:[email protected]
---|---

References

• 📧[email protected]
• 📧[email protected]
• 📧[email protected]
• 📧[email protected]
• TRANSLITE – WORK WITH CONFIDENCE

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>