TRANSLITE GLOBAL TL-MC85 Ethernet Over Coax Adapter User Manual
- June 12, 2024
- TRANSLITE GLOBAL
Table of Contents
TRANSLATE GLOBAL TL-MC85 Ethernet Over Coax Adapter
Product Information
- Product Model Number: TL-MC85 Ethernet over Coax Adapter
- Disclaimer: No part of this document may be reproduced in any form without the written permission of the copyright owner. The contents of this document are subject to revision without notice due to continued progress in methodology, design, and manufacturing. TRANSLITE GLOBAL LLC shall have no liability for any error or damage of any kind resulting from the use of this document.
- Copy Warning: This document includes some confidential information. Its usage is limited to the owners of the product that it is relevant to. It cannot be copied, modified, or translated into another language without prior written authorization from TRANSLITE GLOBAL LLC.
Product Overview Key Features:
- Flexible frequency selection: It works at a high-frequency range. The frequency range is between 1125~1675 MHz. Channels can be flexibly selected based on network conditions.
- Strong interference-proof capability: Physical layer adopts an advanced ACMT mode that is OFDMA, which gives it get strong interference-proof capability by avoiding high noise at lower frequency.
- Advanced data link layer agreement: Link layer adopts TDMA protocol, MP2MP structure. Each device can communicate with any other one. All the adapters adopt the same TDD.
Specifications Basic Info:
- Model: TL-MC85
- Technical Standard: MoCA2.5 Standard
- Maximum Node Network: 16
- Communication Mode: Modulation Mode OFDMA
Frequency Property:
-
Operating Frequency Range: 1125 ~ 1675
MHz -
Channel Bandwidth: 100MHz * 5 = 500MHz
-
Upstream/Downstream Bundled, sharing 500MHz
bandwidth
Cable In:
- Frequency Port: 5 ~ 1675MHz
- MoCA Port Frequency: 1125 ~ 1675MHz
- TV OUT Port Frequency: 5 ~ 1002MHz
- Maximum PHY Rate: 3.6 Gbps
- Coaxial Cable: Bidirectional, up to 3.0Gbps
Application Rate:
- Latency: Typical: 3ms, Maximum: 5ms
- Delay Jitter: 1ms
Port Property:
- Hi/Lo Pass Filter Access Built-in Mode (optional)
- RF Port Mode: F-Female, 75 Ohm impedance
- RF Port: 1 Input (optional) + 1 Output: 1 Input (CATV) & 1 Combined output (MOCA+CATV)
- Ethernet Port: 2 RJ45: 1000BASE-TX 1, 2500BASE-TX *1
- Power Supply Port: DC 5V
Product Usage Instructions
To use the TL-MC85 Ethernet over Coax Adapter, follow these steps:
- Ensure that you have the necessary permissions to use and access the product.
- Connect the TL-MC85 adapter to your existing coaxial cable network.
- Connect the TL-MC85 adapter to your Ethernet-enabled devices using the provided RJ45 connectors.
- Plug the TL-MC85 adapter into a power outlet using the included power supply.
- Check the LED indicators on the TL-MC85 adapter to ensure proper connectivity.
- Configure the TL-MC85 adapter according to your network requirements. This may involve selecting the appropriate frequency range and channel based on your network conditions.
- Once configured, the TL-MC85 adapter will enable Ethernet connectivity over your coaxial cable network.
DISCLAIMER
No part of this document may be reproduced in any form without the written
permission of the copyright owner. The contents of this document are subject
to revision without notice due to continued progress in methodology, design
and manufacturing. TRANSLITE GLOBAL LLC shall have no liability for any error
or damage of any kind resulting from the use of this document.
COPY WARNING
This document includes some confidential information. Its usage is limited
to the owners of the product that it is relevant to. It cannot be copied,
modified, or translated in another language without prior written
authorization from TRANSLITE GLOBAL LLC.
PRODUCT OVERVIEW
TL MC8 5 MoCA ® 2.5 Ethernet over Coaxial Adapter It is designed for data
transmission over coaxial cable. Leveraging coaxial cable resource at home, it
constitutes a fast and reliable Ethernet home network, connecting terminals
such as smart TV, video game console, computer, smart phone etc.
MoCA® 2.5 offers actual data rates up to 2.5 Gbit/s, continues to be backward
interoperable with MoCA® 2.0 and MoCA® 1.1, and adds MoCA® protected setup
(MPS), Management Proxy, Enhanced Privacy, Network wide Beacon Power, Bridge
detection and TR-069 remote management
KEY FEATURES
-
Flexible frequency selection
It works at high frequency range. The frequency range is between 1125~1675 MHZ. Channels can be flexibly selected based on network conditions. -
Strong interference-proof capability
The physical layer adopts an advanced ACMT mode that is OFDMA, which makes it to get strong interference-proof capability by avoiding high noise at lower frequencies. -
Advanced data link layer agreement
The link layer adopts TDMA protocol, MP2MP structure. Each device can communicate with any other one. All the adapters adopt the same TDD. -
Absolute bandwidth supply
MOCA ® 2.5 adapter supports up to 3.0Gbps throughput with low packet loss rate and low latency. -
TR069 remote management
MOCA ® 2.5 adapter supports remote monitoring and management through TR 069 protocol, enabling operators accessing into user’s in-home network from headend, helps troubleshoot and customer QoE. -
MoCA ® protected setup (MPS)
The latest designed MoCA ® protected setup (MPS) allows one press pairing for the home network install. It makes the self installation for end user to setup the network easily, and also isolates the home connection from the neighborhood.
SPECIFICATIONS
Basic Info
Model| TL-MC85
Technical Standard| MoCA2.5 Standard
Maximum Node| Network|
16
Communication Mode
Modulation Mode| OFDMA
Sub-carrier Quantity| 512*5
Sub-carrier Bandwidth| 195.3125KHz
Carrier Density| Modulation| BPSK, QPSK, 8QAM, 16QAM, 32QAM, 64QAM,
128QAM, 256QAM, 512QAM, 1024QAM
MAC Layer Protocol| TDMA/TDD
Frequency Property
Operating Frequency Range|
1125 ~ 1675MHz
Channel Bandwidth| 100MHz * 5=500MHz
Upstream/Downstream Frequency Range|
Bundled, sharing 500MHz bandwidth
Available Beacon
Channel Quantity
| 1150, 1200, 1250, 1300, 1350, 1400, 1450, 1500, 1550, 1600MHz (50MHz
step)
Standard Channel| 1125~1625MHz
Maximum Transmitting
Power
| +3dBm
Typical Power| Transmitting| +2dBm
Power
Mode
| Transmitting| Auto/Manual
Receiving Sensitivity| -70dBm
---|---
Insertion Loss| < 2dB
Transmitting Distance| 300feet
CABLE IN Port
Frequency
| 5 ~ 1675MHz
MoCA Port Frequency| 1125 ~ 1675MHz
TV OUT Port Frequency| 5 ~ 1002MHz
Maximum PHY Rate| 3.6 Gbps
Coaxial Cable
Application Rate
| Bidirectional, up to 3.0Gbps
Latency
Typical| 3ms
Maximum| 5ms
Delay Jitter| 1ms
Port Property
Hi/Lo Pass Filter Access
Mode (optional)
| Built-in
RF Port Mode| F-Female, 75 Ohm impedance
RF Port
| 1 Input (optional) + 1 Output: 1 Input (CATV) &
1 Combined output (MOCA+CATV);
Ethernet Port| 2 RJ45 :1000BASE-TX 1, 2500BASE-TX 1
Power Supply Port| DC 5V
Power & Consumption
Power Supply| DC 5V/1A, External
Power Consumption| <4W
Security
Grounding| <5Ω
Anti-Static| Contact-Discharge 6KV, Air-Discharge 8KV
Power Protection| Surge-Resisting/Low-voltage Protection
Dimension
Dimension| 12980*32mm(L×W×H)
Operating Environment
Operating Temperature|
-10 ~ 45℃
Operating Humidity| 5%~95% , No condensation
Store Temperature| -30~70℃
MECHANICAL DESIGN
****
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>