LYNX LIJ27 Insulated Jacket for 27 Inch Professional Grill Installation Guide
- June 12, 2024
- LYNX
Table of Contents
LYNX LIJ27 Insulated Jacket for 27 Inch Professional Grill Installation
Guide
MPORTANT: Before you build the frame, you must take into consideration the total weight of the liner, grill and any fi nishing materials.
Refer to the cutout dimension table for the proper framing dimensions for the insulation jacket. Determine the entry point for both the gas inlet and electrical connections. Make the 4” square holes for gas and electrical connections (rear or bottom access) based on your requirements.
Note: that the electrical connections are located on the left side and the gas connections are located on the right side.
A Carpenter’s “spirit level” should be used to assure that the framing is level, both front to back and side to side. Note: Never under any circumstance should you install the transformer or run a quick disconnect hose in-between the grill and the inside of the insulating jacket.
Liner Installation
Position the liner into the frame. No part of the combustible enclosure can protrude above the top surface or in front of the face surface of the liner. Shim the liner if necessary.
Grill Installation
If desired any gap remaining between the liner and the combustible enclosure may be fi lled with a non-combustible sealant or caulk.
Cutout Dimensions
| Model | A | B | C | D | E | F |
|---|---|---|---|---|---|---|
| LIJ27 | 33”(83.8 cm) | 5”(12.7 cm) | 23 ¾“(60.3 cm) | 4 ½”(11.4 cm) | 3”(7.6 cm) |
11 5/8”(29.5 cm)
VIJ5301 / LIJ30| 36”(91.4 cm)| 5”(12.7 cm)| 26 ½”(67.3 cm)| 4 ½”(11.4 cm)|
3”(7.6 cm)| 11 5/8”(29.5 cm)
VIJ5361 / LIJ36| 42”(106.7 cm)| 5”(12.7 cm)| 23 ¾”(60.3 cm)| 4 ½”(11.4 cm)|
3”(7.6 cm)| 11 5/8”(29.5 cm)
VIJ5421 / LIJ42| 48”(121.9 cm)| 5”(12.7 cm)| 26 ½”(67.3 cm)| 4 ½”(11.4 cm)|
3”(7.6 cm)| 11 5/8”(29.5 cm)
VIJ5541 / LIJ54| 60”(152.4 cm)| 5”(12.7 cm)| 26 ½”(67.3 cm)| 4 ½”(11.4 cm)|
3”(7.6 cm)| 11 5/8”(29.5 cm)
VIJSB / LIJLSB2| 15 ½”(39.4 cm)| 3 ½”(8.9 cm)| 26 ½”(67.3 cm)| 4 ¾“(12.1 cm)|
3 1/8”(8.0 cm)| 11 5/8”(29.5 cm)
VIJPB / LIJLPB| 26 ¼”(68.0 cm)| 5 3/8”(13.7 cm)| 23 7/8”(62.7 cm)| 4 ¾“(12.1
cm)| 3 1/8”(8.0 cm)| 11 5/8”(29.5 cm)
4” square holes for gas and electrical connections (rear or bottom access). Make these holes in the frame based on your requirements
WARNING
The regulator to be installed outside the insulating jacket. It can be positioned anywhere in the gas supply line between the grill and the shutoff valve.
Gas tubing should never be installed within the insulated jacket.
Insulated Jacket Dimensions
LIJ27
LIJ27
VIJ5361 / LIJ36
VIJ5421 / LIJ42
VIJ5541 / LIJ54
VIJSB / LIJSB
VIJPB / LIJPB
iking Range, LLC
111 Front Street
Greenwood, Mississippi 38930 USA
662-455-1200
For product information, call 1-888-(845-4641) or visit our website : at
vikingrange.com