Newell Kathi Max LED Light Instruction Manual

Newell Kathi Max LED Light

SAFETY INSTRUCTIONS

Before using the product, please read the following instruction manual carefully and keep it for future reference. When transferring the product to a third party, it is advisable to include the instructions.

1. The lamp is a precision device. Do not drop, hit, crush or expose to any shock.
2. The unit is not dustproof or waterproof. Store in a dry, cool and ventilated place. Do not expose to water or other sources of moisture.
3. Do not use near flammable materials and solvents w urządzenie.
4. Do not use the lamp too close to objects. Do not cover the ventilation holes. Do not insert metal parts into the lamp. Do not touch the electrical parts with conductive materials.
5. The lamp can operate in a temperature range of 0°C – 40°C.
6. The lamp will heat up slightly, but it is normal.
7. Do not stare directly at the LED panel that is turned on, it may cause eye damage.
8. Do not use the LED outside in direct sunlight for a long time.
9. Disconnect the power supply for storage or transportation.
10. Allow the unit to cool down before placing it in the package.
11. For use by adults.
12.  If you notice smoke or a strange smell coming from the device, immediately disconnect the power. Do not disassemble. Disassembling the unit will void the warranty. If there are problems with the lamp, bring it to an authorized service center.

Maintenance
Use a dry and soft cloth to clean the unit. Do not clean with water. A little neutral detergent on the cloth to remove stubborn dirt. Do not use strong detergents such as thinner, benzine or alcohol as they may damage the protective coatings.

CONSTRUCTION

1. TFT Display
2. Adjustment Knob
3. Mode button
4. Select button
5. ON/OFF button
6. USB-C Charging Port
7. 1/4 threaded mounting lug

TFT DISPLAY

8. Battery capacity
9. Mode Selected (CCT/HSI/Eect)
10. Color temperature(CCT)
11. Brightness Display(CCT)
12. Color Hue(HSI)
13. Color Saturation (HSI)
14. Scenario Effect Group(Effect)
15. Effect Name(Effect)

FEATURES

1. Turn ON/OFF of power
2. CCT mode
3. HSI mode
4. Effect mode

SCENARIO EFFECT LIST

• Group A: Flash / Flash Fast / TV Screen
• Group B: Candle / Flame 1 / Flame 2
• Group C: Police / Ambulance / Fire Truck
• Group D: Strobe Lights 1 / Strobe Lights 2 / Strobe Lights 3 Group E: Chase slow / Chase mid / Chase fast
• Group F: Fire work 1 / Fire work 2 / Fire work 3
• Group G: Club 1 / Club 2 / Romantic

CHARGING

Charging from 5V USB-C input.

1. Attach the appropriate cable to the light.
2. Attach the cable to a power source.
3. The TFT display will display flashing battery icon while being charged.
4. Charging time varies depending on power source.

SET CONTENT

1. Product.
2. USB-C recharge cable.
3. Printed user manual.

SPECIFICATION

Maximum illumination

| CCT: 2000LM (100% 9900K) 2600LM (100% 2500K)

HSI: R 650LM G 150LM B 450LM (H=100%, L=100%)

Color rendering index| 96 +
Battery capacity| 14,8 V 2500 mAh
Charging / Input power| 5 V 2 A USB-C (wsparcie PD 12 V 1,5 A)
Dimensions| 120,5 x 3,8 cm
Weight| 833 g

• The manufacturer reserves the right to change the information contained in this manual without prior notice.

WASTE MANAGEMENT

The crossed-out trashcan symbol means that waste electrical and electronic, batteries and packagings must not be placed with other household waste. They must be handed over to a separate waste collection system.

WARRANTY

Newell products are covered by a 40-month manufacturer’s warranty. Made in China, In China hergestellt, Hecho en China, Fabbricato in Cina, Fabriqué en Chine, Vyrobeno v Číně, Wyprodukowano w Chinach, Cделано в Китае

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>